69
The software is connected to the GPS receiver, but the signal is too
weak and the receiver cannot determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is available,
but elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be
significant.
Altitude information is available, the position is a 3D position.
GPS navigation is possible.
4.1.8 Traffic information in route planning
The recommended route is not always the same between two points. Real-time traffic
information (TMC) can help you avoid current traffic events like temporary road closures or a
traffic jam caused by an accident. This function is subject to data availability.
Real-time traffic information (TMC)
TMC (Traffic Message Channel) can provide you with the real-time status of the traffic. Route
calculation can avoid road blocks or unexpected traffic jams caused by an accident.
TMC is a specific application of the FM Radio Data System (RDS) used for broadcasting real-
time traffic and weather information.
Using traffic information is enabled by default in the software.
Note!
TMC is not a global service. It may not be available in your country or region.
Ask your local dealer for coverage details.
Your device contains the TMC receiver that is needed to receive Traffic events.
If public Traffic data is broadcast at your location, the software automatically takes into
account the traffic events received. You do not need to set anything in the program. The
receiver will automatically search the FM radio stations for TMC data, and the decoded
information will immediately be used in route planning. The moment your software receives
traffic information that may affect your route, the program will warn you that it is recalculating
the route, and navigation will continue with a new route that is optimal considering the most
up-to-date traffic conditions.
To fine-tune this recalculation, you can set the minimum delay that can trigger a route
recalculation, or you can instruct the software to have you confirm the new recommended
route before it takes effect. You can do these in Traffic settings (page 74).
A special i
con (
) is displayed on the Map screen to show you whether traffic events are
received. The icon shows the status of the traffic receiver when there are no traffic events on
your route, otherwise it shows the type of the next traffic event on your route.
Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
