483690
4
Zoom out
Zoom in
Previous page
1/6
Next page
Montieren Sie jetzt die GPS
Antenne an geeigneter Stelle
(freie Sicht nach oben) und
ziehen Sie das Antennenkabel in
den Schacht. Montieren sie das
externe Bluetooth Mikrofon, falls
erwünscht. Die beste Position ist
hinter dem Rückspiegel, bzw. hinter
dem Steuerrad.
Install the GPS antenna in a
suitable location underneath the
front window (unobstructed view
up to the sky). Proceed with routing
the antenna cable to the mounting
slot. Mount the external Bluetooth
microphone, if so desired. Ideal
places are behind the rear mirror or
behind the steering wheel.
6
7
7
Stecken Sie den Quadlockstecker
vom vorbereiteten ZE-NC2011D Gerät
an das Gegenstück im Fahrzeug an
und schliessen Sie die Verriegelung.
Verbinden Sie die den Fakrastecker
vom GPS Antennenkabel mit dem
Gerät und auch das Kabel vom
externen Mikro, wenn dieses
montiert wurde.
Bevor das ZE-NC2011D in den
Schacht geschoben wird, stecken sie
den Doppelfakra Antennenstecker
vom Fahrzeug am Gerät an.
Insert the Quadlock plug of the
ZE-NC2011D into the receptor of
the vehicle and lock it. Connect
the Fakra plug of the GPS antenna
cable on the backside of the
device - and do the same with the
plug of the external microphone, if
the external mic has been fitted.
Before you can insert the
ZE-NC2011D into the slot, you must
connect the FM antenna dual Fakra
plug to the respective connector of
the device.
9
Drücken Sie die Zierblende wieder
auf. Der Einbau ist hiermit beendet.
Press the trim frame back on.
The installation is completed.
6
8
Verstauen Sie die Kabel in den
Randbereichen und schieben
Sie das ZE-NC2011D in den
Schacht.
Vermeiden Sie zuviel
mechanischen Druck auf die Front.
Es könnten Stecker abbrechen
oder Kabel gequetscht werden.
Schrauben Sie das ZE-NC2011D
mit den vier Originalschrauben
wieder fest.
Lay the wires to the side, making
room for the device. Carefully slide
the ZE-NC2011D into the bay. Avoid
applying too much mechanical
pressure to prevent shearing of
wires and broken connectors.
Fix the the ZE-NC2011D in place,
using the four original Torx screws.
8
9
bl
bl
Nach beendetem Einbau starten
Sie den Motor und fahren aus der
Garage ins Freie (GPS Antenne
braucht „freie Sicht nach oben“).
Das ZE-NC2011D schaltet sich mit
der Zündung ein – wechseln Sie
nun manuell in den Navigations-
modus durch drücken der NAV
taste und lassen Sie das Gerät ca.
3 - 5 Minuten lang den „Sat Fix“
erstellen.
Solange das Gerät noch Satelliten
sucht, wird dies über ein Icon mit
kreisenden Punkten auf dem Bild-
schirm dargestellt.
Sie können nun das Gerät
ausschalten, ein Navigationsziel
eingeben oder aber weitere
Einstellungen im Setup Menü nach
persönlichem Wunsch vornehmen.
With the installation completed, start
the engine and drive your vehicle
out of the garage into open terrain
(GPS antenna must have free “sight
up to the sky”). The ZE-NC2011 will
turn on with the ignition – please
select the navigation mode manually
by pressing the NAV button. Device
now needs 3 to 5 minutes to create
“Sat Fix”.
As long as the device is searching for
GPS satellites, you can see a small
icon with rotating dots on the screen.
You can turn your device off, enter
a destination or continue to set
functions according to personal
preferences in the setup menu.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ZE-NC2011D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ZE-NC2011D in the language / languages: English, German as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zenec ZE-NC2011D

Zenec ZE-NC2011D User Manual - English, German - 104 pages

Zenec ZE-NC2011D User Manual - Dutch - 56 pages

Zenec ZE-NC2011D User Manual - Turkish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info