167880
24
Zoom out
Zoom in
Previous page
1/30
Next page
24
9. Mute On/OFF
This function is to enable or disable muting of the decoder output. When mute is enabled, this is
indicated on the screen until it is disabled. To disable mute, use the „MUTE“ button once more, or
the master „VOLUME UP“, „VOLUME DOWN“ button respectively.
10. Setup Menu Display
Controlling DRC, Pro Logic, crossover, line input levels and each channel level is only possible in
the setup menu. For more information, refer to the previous expalanations of this section. When
the setup menu is invoked, the following display is shown.
-> PRO LOGIC ON/OFF
-> DRC ON/OFF
-> CROSSOVER XXXHz*
-> INPUT1 LEVEL X V**
-> INPUT2 LEVEL X V
-> CHANNEL LEVEL
* XXXHz of Crossover is 60Hz to 220Hz in 10Hz steps
** X V has the range of 0.2 – 6V
Movement of arrows in the left column is achieved by pressing the „MENU UP“ or „MENU DOWN“
button. When a function is selected, the arrow corresponding to the function is blinking. The On or
Off status is controlled by „MENU RIGHT“ or „MENU LEFT“ button. In this case, both buttons act
identically. The adjustment of the cutoff frequency for the crossover  lter is also made by „MENU
RIGHT“ or „MENU LEFT“ button. However, the left button is used for decreasing frequency and
right button for increasing in this case. The „SETUP“ button is used to enable and disable setup
menu.
11. Channel Level Control Menu Display
As the sub-menu of setup menu, the following menu for channel level control is provided. To view
this sub-menu, move to „CHANNEL LEVEL“ in setup menu using „MENU UP“ or „MENU DOWN“
button. Then, push the „ENTER‘ button on the remote control unit.
-> FRONT LEFT
XX dB*
-> FRONT RIGHT XX dB
-> CENTER
XX dB
-> REAR LEFT
XX dB
-> REAR RIGHT
XX dB
-> WOOFER
XX dB
* XX dB is -10 to +10dB in dB steps
The selection of channels is identical to the selection of functions in the setup menu. The level
change is made by „MENU LEFT“ and „MENU RIGHT“ buttons. The left button is used for value
decreasing and the right button for increasing, exactly indetical to the adjustment of the crossover
lter frequency. To escape the channel sub-menu, press the button twice. The rst push is to
return to setup menu from this sub-menu, while the second push lets you leave the escape setup
menu.
ZE-5.1D Manual E+D 27.02.2004, 14:33 Uhr24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec ze 5 1 d at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec ze 5 1 d in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info