729840
31
Zoom out
Zoom in
Previous page
1/38
Next page
60 Rev.B 61 Rev.B
TIME ALIGNMENT
Function Icon Operation
Unit

Selection of desired unit
ms = time
cm = distance
Speaker

Tap to select the desired speaker
(FL / FR / RL / RR / SW)
Delay
ms = 0.0 < > 20 in approx. 0.1 ms steps
cm = 0 < > 680 in approx. 3 cm steps
In this menu you can set the time delay correction for the loudspeakers in your vehicle.
The distance between the ears and the speaker system installed in the vehicle varies considerably
due to the given arrangement of the factory mounting location. This menu gives you the option to
delay the audio signal at each of the speakers so that you have a ”center stage” effect.
Set your central listening position. Measure the distance from this position to each speaker.
Now you need to add the corresponding delay - depending on the speaker with highest distance - to
move the speakers to same distance from selected position. Enter these distance to let all speakers
have the same distance. You can fine tune values by “ear” after the distances from listening position
to each speaker have been entered, simply by adjusting the left front speaker delay until center stage
position is reached.
TFT DISPLAY CONFIGURATION
In the TFT Setup menu you can make screen settings that control the day/night brightness of the
TFT LCD display screen.
Function Icon Operation
TFT
configuration
Tap to adjust display configuration
TS-Brightness
Day
Day adj range
0 ~ 20
TS-Brightness
Night
Night adj range
0 ~ 20
TS-Auto
Standby
Tap to enable or disable TFT Auto Standby function and Auto
Screen shutdown. TFT goes into standby after selected time.
NOTE
Using the DISP button you can set the display brightness to three levels
( 100% → 50% → 0% ).
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec Z-N528 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec Z-N528 in the language / languages: English as an attachment in your email.

The manual is 14,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zenec Z-N528

Zenec Z-N528 User Manual - German - 38 pages

Zenec Z-N528 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info