729825
27
Zoom out
Zoom in
Previous page
1/43
Next page
52 Rev.E 53 Rev.E
NAVIGATION SOFTWARE INSTALLATION
Before you can use the Z-N3756 navigation software supplied on microSD card, the Android
device (Z-E3756) must be prepared by installing a software.
a. Insert the provided mircoSD card with navigation software into the respective slot of the
device. Turn on the device.
b. Tap on the “navigation source icon” in the main menu to start the standard installation process
(illustration 1).
c. The software installation will run in a step-by-step mode. A visual animated software installation
status bar allows you to track progress (illustration 2). The complete update process takes approx.
30 ~ 60 seconds.
d. Finally, the navigation will be start automatically if the installation was successful. Device should
show navigation loading mode (illustration 3). Now close the navigation software, turn off the device
and read the info given under “Sat-Fix” below.
NAVIGATION START UP INSTRUCTIONS
Illustration 1
Illustration 2
Illustration 3
1
2
FIRST NAVI START-UP (SAT FIX PROCESS)
After the device install is completed make sure, the vehicle is located outdoors under free sky.
There should be no objects above vehicle affecting GPS reception (trees, tall buildings etc.).
Tap on the navigation icon in the main menu to start the navigation mode. Tap on “Show Map” to
initiate the “search GPS” process.
Allow 3 to 5 minutes of time to for the creation of the so called Sat-Fix. During this period, the
vehicle must not move nor drive!
Online Updates (Map Content + Bugfixes)
Naviextras Toolbox is a Windows utility, able to establish the server access to the Naviextras portal.
■BeforeyouupdatethenavigationcontentofyourmicroSDcard,alwaysdownload,installanduse
the latest Toolbox software.
■Beforeyoucandownloadcontentandupdatesyouareaskedforsettingupauseraccountonthe
Naviextras portal. Once the Toolbox software has installed a login window pops open to indicate
readiness for user account setup.
■WiththeuseraccountreadymakesurethefirststepisbackingupthemicroSDcardcontentpriorto
any content update. Data backup is offered automatically with Toolbox recognizing a valid nav
license on the microSD card.
■Donotstartupdatebeforeyouhavenotcreatedabackup.Thebackupallowsyoutorestore
original map data of the package, which is a welcome help to cope with update or installation
problems, which would otherwise become costly software restore processes.
■Important:WhenafreeorpaytypecontentupdatewasinstalledonthemicroSDcard,thefollowing
two steps must be completed to reactivate the license:
1) Insert the microSD card into your naviceiver and start the navigation.
Shut down device, remove the microSD card.
2) Start Toolbox and connect the microSD card to your PC or notebook and follow the instructions of
the software (activation of license).
NAVIGATION START UP INSTRUCTIONS
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec Z-E3756 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec Z-E3756 in the language / languages: English as an attachment in your email.

The manual is 18,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zenec Z-E3756

Zenec Z-E3756 Installation Guide - English - 6 pages

Zenec Z-E3756 Installation Guide - German - 6 pages

Zenec Z-E3756 User Manual - German - 43 pages

Zenec Z-E3756 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info