729835
4
Zoom out
Zoom in
Previous page
1/7
Next page
1
4
4
3
2
EXAMPLE OF INSTALLATION GOLF VI
REMOVAL WORK AND PREPARATION:
3. Unscrew and remove the four Torx Screws
(T25) of the original device.
1. Gently lift the trim frame starting on the right
side of OE device. For successful completion of
this step, using a release tool made of plastic is
mandatory.
2. Run the prying tool anticlockwise around the
trim frame, to release it from the console. The
trim frame should come off of the console
completely.
4. Remove the original device by pulling it out of
the radio slot. Detach all the cables from its
backside.
1. Remove the ignition key and keep it outside the car until the installation is finished.
2. Please wait for about 10 minutes until the CAN bus system is completely shut down, before you start
with the uninstallation of the original device.
3. Now you can start with the uninstallation of the original device.
4. Please switch on the ignition only, once all installation steps are completed and the ZENEC system
is firmly mounted.
NOTE
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zenec Z-E2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zenec Z-E2050 in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zenec Z-E2050

Zenec Z-E2050 User Manual - English - 77 pages

Zenec Z-E2050 Installation Guide - German - 7 pages

Zenec Z-E2050 User Manual - German - 77 pages

Zenec Z-E2050 User Manual - Dutch - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info