540068
49
Zoom out
Zoom in
Previous page
1/52
Next page
49
PI-004_v02
TIMER function
1
Select the desired power level of the selected heating
zone using the
, buttons.
2
Press the button within 5 seconds (when the power
indicator is ashing) and set the desired time (max. 120
minutes) with the
, buttons. If you press and hold
the
or button, the time will respectively increase or
decrease by 10 minutes.
3
Con rm the settings by pressing the button. Upon
the lapse of the set time a single beep will be heard and the
heating zone will switch off.
To cancel the TIMER function during operation,
simultaneously press the , buttons.
A glowing dot symbol next to the power indicator e.g.
” indicates that the TIMER function is enabled for the
given heating zone.
If you do not select any heating zone (within 5 seconds)
before pressing the
button, the TIMER function will
not be set to any heating zone. After the lapse of the set
time, a 30-second beep will be heard.
LOCK function
The LOCK function enables to block all the buttons (except
for and buttons).
1
Press to block the buttons.
2
The TIMER indicator will show the symbol “ ”.
3
To unblock the buttons press and hold the button.
If you switch off the hob with the
button when the
LOCK function is active, to switch it back on you have to
press the
button and unblock the hob by pressing
and holding the
button.
Cleaning and maintenance
Remember to keep the hob clean.
Unplug the appliance and before cleaning.
Do not use steam jets to clean the hob.
Light dirt
wipe the hob with a cloth socked in lukewarm
water wipe until dry with a sponge.
Heavy dirt
wipe the hob with a cloth socked in lukewarm
water wipe until dry with a special sponge for cleaning
glass.
Limestone and other residue
remove the dirt by applying
a small amount of special substance for cleaning ceramic
glass or white wine vinegar and next wipe with a dry cloth.
Sweetmeat, melt aluminum, plastic
remove by using
a special scraper suitable for cleaning glass and next
wipe with a damp cloth. If necessary use a special
substance for cleaning ceramic glass.
Display and control of errors
The most common problems together with the remedies are
described below.
In case of a malfunction, the induction hob will automatically
switch on the protective mode and one of the following codes
will be displayed:
F0/F1/F2 – NO VENTILATION – contact the service center.
F3-F8 – INCORRECT VOLTAGE – switch the appliance off
and switch it back on. If the problem persists, contact the
service center.
E3/E4 – INCORRECT TEMPERATURE – check the utensil.
E5/E6 – INCORRECT HEAT DISTRIBUTION – switch off the
appliance, allow to cool down and switch it back on.
Never attempt to repair the appliance by yourself!
Ecology – environment protection
Each user can protect the natural environment. It is neither
dif cult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer ZPI6012UE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer ZPI6012UE in the language / languages: English, Polish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info