540043
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
PC-005_v02
2 x 230 V 2L+2N~
16 A
400V 2N~
16 A
220-240 V~
32 A
Installation and Connection to the Mains
INSTALLATION (Fig. A)
The appliance may be installed only by
a certi ed installation technician.
The dimensions and assembling instructions are presented
in the gures above.
1
Cut out an opening in the worktop according to the
dimensions shown in the gures.
2
Place the hob in the opening and x to worktop using
brackets and screws.
Never install the hob above ovens without ventilation
function or near devices which generate heat.
Make sure that the worktop has a thickness of at least
30 mm.
Make sure the worktop is made of suitable heat resistant
material to avoid deformation due to heat produced by
the hob.
After installation, make sure that the hob is well ventilated
and that the air inlet and outlet are not obstructed.
For safety reasons, the distance between the
hob and a cabinet mounted above it should be
at least 760 mm.
CONNECTING THE APPLIANCE TO THE MAINS
SUPPLY
The device may be connected to the mains only
by a certi ed technician.
Before connecting the appliance to the mains supply
read the information on the rating label and the appliance
connection diagram.
The mains supply must be equipped with a suitable
fuse.
Additionally, the mains supply must be equipped with
an appropriate circuit breaker for disconnecting the
appliance in emergency situations.
The power cord must not be bent or squashed.
Please remember, there is an obligation to
connect a protection circuit to the clamp of
the connection terminal strip marked with the
sign. The wiring system powering the plate
should be protected by an appropriately chosen
safeguard, and additionally to protect the power
line it may have a proper switch cutting off the
power supply in case of emergency.
The installer is obliged to ll in the warranty
card which is a basis for warranty claims.
WIRING DIAGRAM
400 V 3~
16 A
Technical Parameters
The technical parameters are indicated on the rating label.
The ceramic hob is a class 1 appliance equipped with
a power cord with grounding plug.
The appliance satis ed the requirements of relevant
standards.
The appliance complies with the following directives:
Low Voltage Directive (LVD) – 2006/95/EC.
Electromagnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the rating label.
The gure below shows inappropriate
connection of wires.
green-yellow
green-yellow
green-yellow
green-yellow
grey
grey
grey
grey
blue
blue
blue
blue
brown
brown
brown
brown
black
black
black
black
blue
wn
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer ZPC6057UE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer ZPC6057UE in the language / languages: English, Polish as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info