538902

Zelmer Subito CM2005M Manual

117
Zoom out
Zoom in
Previous page
1/120
Next page
117CM2005-001_v02
Demonstration of problems encountered while using the espresso machine
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Coffee is
dripping from the
side of the lter
holder
The lter holder is incorrectly installed or screwed.
Make sure the holder is correctly situated in the brewing
head set, and screwed tightly home.
There are grains of coffee on the edge of the lter pad.
Clean the edge around the lter, and wipe any traces of
coffee from the head clean.
The brewing head is dirty. Wipe the head with a moist cloth.
The head is damaged. Contact an authorized service center.
The rubber seal of the head is damaged or worn out. Contact an authorized service center.
Coffee does not
pour out
No water in the water container. Fill the container with water.
The water container is incorrectly installed.
Press the water container to check whether it is correctly
installed.
The head lter is clogged.
See DESCALING THE APPLIANCE.
The coffee lter is clogged. Coffee is too nely ground or
too compressed.
Empty the lter and rinse it with running water. Dry the
brewing head with a cloth.
Coffee pours out
in drops
Coffee is too nely ground or too compressed.
If you use nely ground coffee, do not compress it too
much.
The appliance is clogged by limestone.
See DESCALING THE APPLIANCE.
Espresso does
not have the
characteristic
froth
Coffee is stale or dry.
Use fresh coffee. After opening coffee make sure that you
store it in an airtight container
Coffee is not compressed enough. Compress the ground coffee more.
Coffee is too coarsely ground.
Use nely ground coffee or change the brand of your
coffee.
Not enough coffee in the lter.
See MAKING COFFEE.
The holder is
going loose
during making
coffee
Coffee is compressed too much. Compress the ground coffee less.
The ground coffee is too ne. Change coffee to a less ne type.
The lter holder is not situated tightly enough because it
was not screwed tightly.
Make sure the lter holder is situated correctly and
screwed tightly home in the brewing head.
See MAKING COFFEE.
There are grains of coffee on the edge of the lter pad.
Clean the edge around the lter, and wipe any traces of
coffee from the head clean.
The brewing head is dirty. Wipe the head with a moist cloth.
The head is damaged. Contact an authorized service center.
The rubber seal of the head is damaged or worn out. Contact an authorized service center.
Coffee is not hot
Cups, lters or the lter head are cold.
Before making coffee heat up cups, lter, and the holder.
See MAKING COFFEE.
During making cappuccino or latte, milk is not heated
enough.
Check if milk is heated during foaming. Make sure milk is
not boiling.
See MILK FOAMING.
No steam is
coming from the
steam nozzle
The steam nozzle is blocked.
See Cleaning and Maintenance.
Not enough
foamed milk
Milk is not fresh. Check if milk is fresh.
Milk temperature is too high. Make sure if milk is cool enough before use.
The jug.
In order to get the best effects in foaming, use the
stainless steel jug, and if it is possible, cool it down or
rinse it with cold water.
The steam nozzle is clogged.
See Cleaning and Maintenance.
Milk is boiled. Use fresh, cool milk.
Coffee is poured
out unevenly into
cups
Coffee is not evenly poured out or ows on and off.
Make sure coffee is evenly compressed, and check,
if there are no obstacles in the nozzles of the head.
Damaged barrier in the lter holder. Contact an authorized service center.
… 117 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Subito CM2005M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Subito CM2005M in the language / languages: English, Polish as an attachment in your email.

The manual is 6,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info