108 CM2005-001_v02
Before First Use
Before using the coffee maker for the rst time clean all the
accessories with warm water and a gentle dishwashing liquid.
Thoroughly dry all the accessories before reassembling
them.
Follow these steps to prepare the appliance for its rst use.
1
Open the lid and take out the water container.
2
Fill the container with fresh, cold water up to the MAX
level.
3
Place the lled container in the appliance. Make sure the
container is secured, and close the lid.
It is possible to fi ll in the water without
removing the container. In order to do this, lift
the lid, and pour fresh, cold water up to the
MAX level.
The water container should not be opened
during coffee making.
4
Plug the appliance into the appropriate power source
(data speci ed on the rating plate of the appliance).
5
After turning the control knob to the preheating position,
the work light starts ashing indicating the appliance is
heating and getting ready to work.
6
Place the dispenser, the silicone pad, and the desired
lter into the lter holder. Afterwards turn over the lter so
that the protrusions are placed in the nodules of the lter
holder (it prevents the lter from falling out of the holder).
Place the silicone pad always with its convex
side facing downward.
