540080

Zelmer Julita Manual

24
Zoom out
Zoom in
Previous page
1/26
Next page
26
Hint
Information on the product and hints on its use
The appliance is intended for domestic use. In case
●
it is used for food business purposes, the warranty
conditions shall change.
Unplug the appliance after operation.
●
Use a soft brush to wash the metal parts especially the
●
sieve with the sharp grinding disc.
Do not wash metal parts in the dishwasher. Aggressive
●
detergents used in the dishwasher cause these parts
to darken. Wash them manually using traditional
dishwashing liquids.
Before the rst use, wash thoroughly all elements of
●
the equipment.
Juice extractor assembly (Fig. C)
1
Insert the bowl on the motor so that the groove ts into
the slit of the motor housing.
2
Insert the sieve on the driver, press until stop and check
if it is correctly inserted and it turns easily.
3
Insert the lid on the bowl.
4
Lift both clamps and insert the fastenings in the openings
of the lid.
5
Press the clamps to the housing (you will hear
a characteristic click).
6
Place an appropriate utensil under the groove discharge.
Start up and operating
the juice extractor (Fig. D)
Check if the switch is in the “0” position.
●
Unwind a sufcient length of the cord. The remaining
●
cord can be stored in the housing. Put the remaining
cord in the housing through the opening situated at the
side of the juicer.
1
Plug in the appliance and switch it on.
2
Place the product to be processed into the feeding tube
and gently press with the pusher.
After operation
(after extracting the juice) (Fig. E)
1
Switch off the appliance.
2
Unplug the appliance.
Dismantle the parts – as in the case of the initial wash.
●
Maintenance
After you have nished clean the juice extractor
●
thoroughly to avoid the residue drying out.
The motor base housing should be cleaned with a wet
●
cloth and a small addition of a washing-up liquid.
Use a brush to clean the strainer, clean it in a running
●
water. Cleaning this part with your hand may result in skin
injury.
Do not use metal brushes to clean the strainer basket.
●
The other components (juice bowl, cover and food
●
pusher) should be cleaned after nishing the work in
a lukewarm water with an addition of a washing-up
liquid. Rinse them and dry. These component may be
also cleaned in a dishwasher at max. 60°C (except the
strainer).
Do not use aggressive detergents, such as emulsions,
●
polishes, etc, as they may remove graphic symbols
(marking, signs, etc.).
Dirt entrapped in corners and holes should be removed
●
with a toothbrush or a bottle-brush.
Take care of transparent plastic components,
which are sensitive to shocks and falls and
may be damaged easily.
Technical data
The technical parameters are quoted on the nameplate of
the product.
Admissible time of non-stop operation 15 minutes
An interval between repeated operation 30 minutes
Noise generated by the appliance (L
WA
) 80 dB/A
The juice extractor type 377 is built in II class insulation .
The juice extractor meets applicable norms requirements.
The appliance meets the requirements of the directives:
Low voltage electrical device (LVD) – 2006/95/EC. –
Electromagnetic compatibility (EMC) –2004/108/EC. –
The product is marked with CE symbol on the nameplate.
Description (Fig. A)
1
Motor base
2
On/Off button
3
Clamps
4
Clutch
5
Juice bowl
6
Strainer basket
7
Cover
8
Food pusher
Before operation (Fig. B)
Before the rst use, dismantle the juice
extractor, wash and dry the parts that have
contact with the processed product.
1
Place the motor on a hard, clean and dry surface near
the electrical outlet.
2
Grasp the clamps on both sides of the appliance and pull
them away from the motor housing.
3
Lift the clamps, release the lid and lower the clamps.
4
Take out the food pusher. Remove the lid and the bowl
together with the sieve.
… 24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Julita at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Julita in the language / languages: English, Polish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info