540069

Zelmer HS1250 Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
36 HS1250-001_v01
Do not hold any section of hair in the
straightener for more than 2 seconds on the
entire hair length.
2,7 m long, 360 degrees swivel power cord
ensures ease of use of the appliance.
7
Repeat the above step to achieve the desired results.
8
Repeat the steps 5 to 7 for each section of your hair.
The appliance is equipped with an automatic
power switch, which is activated after 72
minutes of use.
9
After the desired effect is achieved switch the appliance
off and disconnect it from the power source.
When your hair styling is nished, wait for your
hair to cool down.
AFTER USE
1
Press the On / Off button . The LCD display with the
temperature setting will turn off.
2
Remove the plug from the power socket.
3
Rest the hair straightener on a heat resistant surface and
let it cool down before cleaning and storing.
Cleaning and maintenance
To ensure long-lasting operation of the hair straightener,
clean the appliance regularly.
Before cleaning, turn off and unplug the hair
at iron from the power source, wait until the
appliance is completely cool.
To avoid heating plates contamination, clean
them after use.
1
Clean all parts of the appliance with damp cloth and
then dry.
Do not immerse the hair straightener in any
liquids.
2
Do not use corrosive or abrasive agents or solvents, as it
may damage the appliance.
Hair straightener operation
PREPARATION
1
Plug the mains cable into the power socket.
2
Press the On / Off button once to switch the
appliance on. Default temperature of 180°C will display and
then start blinking on the LCD display.
3
To select the temperature press temperature setting
buttons respectively: “+” to increase and “–” to decrease the
temperature.
Temperature setting can be adjusted from
130°C to 230°C.
Single pressing of the temperature setting
buttons will increase or decrease the
temperature setting by 10°C.
When increasing the temperature, the set
temperature value will blink on the LCD
display until the heating plates reach the set
temperature.
Temperature setting
Temperature settings allow to adjust the
temperature of heating plates to the structure
and hair type, which is to be styled.
Guidelines for selecting correct temperature:
Use lower temperature for soft, thin hair, and higher
●
temperature for thicker and coarse hair.
Start with lower temperature and check your hair; if more
●
straightening is required increase the temperature and
try again to work out the correct temperature setting for
your hair.
Too low temperature may not straighten your
hair or the result will not be long lasting; too
high temperature may burn your hair.
It is advisable to have one hour break between
attempts not to damage your hair.
HOW TO USE THE HAIR STRAIGHTENER
The secret to shiny, straight hair is in preparation.
1
Wash your hair with shampoo and apply hair conditioner.
2
Dry and brush your hair.
3
For particularly wavy or thick hair use hair straightening
preparation. Follow manufacturer’s instructions.
4
Section your hair off. The thinner the section the better
the result.
5
Starting close to the roots, clamp the section of hair
between the heating plates.
6
Move the hair straightener through the sectioned hair
from the roots to the ends.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer HS1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer HS1250 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info