539669

Zelmer Elf 2 323.0 EF Manual

42
Zoom out
Zoom in
Previous page
1/42
Next page
46
E
B
Appliance elements
1
Combination brush fastening
2
Outlet lter cover
3
Plug and cord
4
ON/OFF button
5
Suction adjustment knob (323.0 type)
6
Bag repletion indicator
7
Cord rewind button
8
Handle
9
Front cover fastening
10
Suction hose
11
Inlet lter (installed in the vacuum cleaner)
12
“Microlter” outlet lter (installed in the vacuum cleaner)
13
Telescopic suction tube (type 323.0 EK)
14
Segmented suction tubes (type 323.5 EF, 323.0 EF)
15
Paper bag (2 items)
16
Small brush
17
Small nozzle
18
Crevice nozzle
19
Switchable combination brush
20
Parquet brush “BNB” (additional equipment – may be
bought in retail centers)
21
Turbobrush (additional equipment – may be bought in
retail centers)
22
SAFBAG dust bag (additional equipment – may be
bought in retail centers)
Preparing the vacuum cleaner
for operation
1
Pull the end of the suction hose into the opening and
press lightly.
2
Attach the other end of the hose (the handle) to the
suction tube.
3
Join both segments of the suction tube together.
4
In case of the telescopic suction tube adjust the
necessary tube length by moving the slider according to the
slide in/slide out direction arrow.
5
Assemble the appropriate nozzle or brush to the other
end of the suction tube.
6
To clean hard surfaces – wooden oors, plastic oors,
ceramic tiles etc. pull out the brush by pressing the switch on
the combination brush according to the gure .
7
Pull the plug and cord (3) out of the vacuum cleaner.
ATTENTION! While pulling out the cord, pay attention
to the yellow stripe which signals the end of the
cord. Further attempts (pulling on cord) may result in
damaging the cord.
8
Plug in the appliance.
Before operation make sure that the SAFBAG bag is installed
in the vacuum cleaner chamber and that inlet lter and the
outlet lter is installed in the appliance.
9
Switch on the vacuum cleaner by pressing the “on/off”
button (4).
10
The vacuum cleaner is equipped with suction adjustment
knob, which allows smooth regulation of the vacuum cleaner
power. Power is regulated with the use of the knob. If you
turn the knob (in the direction of max or min sign), you
will increase or decrease suction power depending on the
direction (323.0 type).
Filter disassembly
Before changing the lters make sure that the vacuum cleaner
is switched off and unplugged from the mains supply.
INLET FILTER
1
Release the catch of front cover (9) and open it.
2
Pull the bag out of the chamber (see p. E).
3
Remove the inlet lter (11) out of the housing.
4
Put a new lter paying attention to insert it entirely into
the outlet.
5
Insert a bag into the vacuum cleaner chamber (see p. E).
6
Close the front cover of the vacuum cleaner.
ATTENTION! The damaged inlet lter should be replaced
with a new, genuine manufactured product only.
“MICROFILTER” OUTLET FILTER
1
Push the outlet lter cover blockade and open it.
2
Take out worn-out outlet lter.
3
Put a new lter paying attention to insert it precisely in its
place.
4
Close the outlet lter cover - the outlet lter cover
blockade should slam. Characteristic “click” means that the
outlet lter cover is correctly mounted.
ATTENTION! Always replace a damaged inlet lter only
with a brand new one.
Dust bag disassembly/assembly
1
If the bag repletion indicator is entirely covered by
orange diaphragm whereas suction tube or brush is lifted
over rened surface, it means that you have to change a dust
bag. The bag repletion indicator may start as the result of
clogging of suction hose or other elements connected with it.
2
Switch off the vacuum cleaner by pressing the on/off
button (4).
3
Unplug the appliance.
4
Pull the end of the hose out of the inlet opening of the
vacuum cleaner.
5
Release the front cover fastening (9) and open the cover.
6
Holding the dust bag plate, slightly pull it out of the bag
handle.
A
C
D
… 42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer Elf 2 323.0 EF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer Elf 2 323.0 EF in the language / languages: English, Polish as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info