538906
125
Zoom out
Zoom in
Previous page
1/128
Next page
125
CM4003-001_v01
5
In order to clean the coffee delivering pipe, press the
pipe catch and pull it upward.
6
Wash the coffee delivering pipe under running water.
7
Dry the cleaned element before tting it in the
appliance.
DESCALING
Scale is a mineral build-up which naturally occurs on all
appliances connected with heating water.
Regular descaling is recommended to extend the service
life of your appliance. The symbol appearing
on the display will signal that it is necessary to run the
descaling process.
Always descale your appliance in accordance
with the user manual. Appliance malfunctions
due to failure to descale shall not be repaired
under warranty.
1
When the machine signals that it is ready to work,
press the
button on the control panel.
2
Keep pressing the button until appears on the
LCD display.
3
Press the button again, in order to con rm the
selected option. The following symbol will appear on the
display.
If the water lter has been mounted in the water tank,
remove the  lter (see the “WATER FILTER” section).
4
Press the button again. The following symbol will
appear on the display.
5
Fill the water tank with the citric acid solution (use
650 ml of the solution).
Proposed solution: 2 teaspoonfuls (approx.
30 g) of citric acid in one litre of water.
6
Press the button. The descaling process will
begin.
The descaling process will take about 20
minutes.
7
After completing the above operations, the symbol
will begin to ash on the LCD display to remind you
that it is necessary to remove the citric acid solution from
the tank and to ll the tank with clean water (pour the clean
water not exceeding the MAX level).
8
After placing the water tank in the machine, the
button will begin to  ash.
9
Now, after pressing the button, the cleaning
process will start.
10
On completion of the descaling programme, the
appliance will return to the standby mode.
Do not unplug the machine during the
process as this may cause the citric acid to
be retained inside the machine.
WATER FILTER REPLACEMENT
The water lter should be replaced in the following
situations:
After each 50 litres of water used, the
symbol
will appear on the display to remind you of replacing
the water  lter.
The lter should be replaced every two months
even though the machine does not remind of its
replacement.
If the machine has not been used for at least 3 weeks.
In order to replace the  lter and reset the used water meter,
follow the directions below.
1
Turn on the appliance.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer CM4003ALS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer CM4003ALS in the language / languages: English, Polish as an attachment in your email.

The manual is 10,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info