538906
121
Zoom out
Zoom in
Previous page
1/128
Next page
121
CM4003-001_v01
Setting other functions
ENERGY SAVING FEATURE
Your appliance comes with a power saving feature,
enabling you to reduce energy consumption when the
machine is not in use.
This feature will automatically turn off the appliance
(activate the standby mode) after user-dened time (the
default setting is 25 minutes).
To set your standby mode time, proceed as follows:
1
Make sure that the appliance is ready for operation.
The “machine ready” light should appear on the display.
2
Press the , button to enter the programming
mode.
3
Press to see the available features. Keep pressing
the button to move through the features.
4
When the display shows , press the button
to set the time to automatic standby.
5
Press to move between the available options:
, , , ,
.
Select to disable the power saving
feature. The appliance will remain on until
switched off by the user.
6
Press to conrm your settings.
7
Press to exit the programming mode.
WATER HARDNESS
1
When in the programming mode, you can adjust water
hardness settings . Press the button.
2
Press the button repeatedly until you select your
required water hardness level.: soft water,
, , ,
– hard water.
Set water hardness level based on the
result of water hardness test (see “WATER
HARDNESS CHECK”).
3
Press to conrm your settings.
4
Press to exit the programming mode.
DISPLAY BRIGHTNESS
1
Press in order to select screen brightness setting
option in the programming mode.
2
Press the button repeatedly until you select your
required display brightness: – max. dark, ,
, – max. bright.
3
Press to conrm your settings.
4
Press to exit the programming mode.
SOUND SIGNALS
1
To enable/disable the sounds in the appliance, enter
the programming mode and select by pressing the
button.
2
Press repeatedly to browse through the available
options: – mute off, – mute on.
3
Press to conrm your settings.
4
Press to exit the programming mode.
DESCALING
For descaling instructions, see “Cleaning and
Maintenance” / “DESCALING”.
WATER FILTER
1
To set your coffee machine to operate with or without
the water lter, enter the programming mode and select
by pressing the button.
2
Press repeatedly to browse through the available
options: – water lter on, – water lter off.
3
Press to conrm your settings.
4
Press to exit the programming mode.
REPLACING WATER FILTER
The method of water lter replacement was described in
the point “Cleaning and Maintenance” / “REPLACING
WATER FILTER”.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer CM4003ALS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer CM4003ALS in the language / languages: English, Polish as an attachment in your email.

The manual is 10,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info