538885

Zelmer CK2320 Manual

50
Zoom out
Zoom in
Previous page
1/54
Next page
54 CK2320-001_v01
5
Plug in the power cord plug (17) to a grounded electricity
supply outlet. You will hear a short beep and the water level
indicator will illuminate as the appliance will be turned on.
The water indicator light will turn off
automatically after 40 seconds.
Operating the appliance
BOILING AND MAINTAINING WATER
TEMPERATURE (Fig. E)
1
After plugging in, the appliance will automatically go to
the boiling mode. The (19) (RE-BOIL) LED indicator will
light and the temperature LED indicator (24) will ash for the
value 85°C.
2
Once water comes to a boil, the appliance will go
to the keep warm mode (accompanied by three sound
alarms) and the temperature LED indicator (24) will light for
temperature 85°C.
3
Using the button ( ) (23) it is possible to keep the
water at the following temperatures: 98°C, 85°C or 65°C.
It is also possible to turn off the keep-warm function and go
to the cooling mode ( ).
In the keep-warm mode, when water temperature falls
●
below the xed value in grades, the appliance will
automatically switch to the keep-warm mode and once
it reaches the appropriate temperature it will return to the
keep-warm mode.
In the cooling mode, the heater is off and water is cooled
●
automatically to the ambient temperature.
Functions available in the boiling mode: (
●
, DISPENSE,
/ ).
Functions available in the keep-warm mode: (
●
,
DISPENSE, / , DECHLORINATE/RE-BOIL).
Water temperature will not change instantly
after pressing the button. The heating and
cooling process takes some time, depending
on the amount of water in the appliance.
4
In order to turn on the re-boiling mode, press the (18)
DECHLORINATE/RE-BOIL button once. The appliance will
start boiling the water.
In the re-boil mode, the
●
RE-BOIL LED indicator (19) will
light and the temperature LED indicator (24) will ash for
the previously selected temperature.
5
To turn on boiling with dechlorination (in the boil and
re-boil mode), press the DECHLORINATE/RE-BOIL button
(18) twice. The dechlorinate mode will be turned on.
The
●
RE-BOIL LED indicator (19) and the temperature
LED indicator (24) for the previously selected temperature
will both ash.
After the dechlorination process completes, you will hear
●
a sound alarm three times, and the RE-BOIL LED indicator
(19) will go out and the temperature LED indicator (24) for
the previously selected temperature will light steadily.
Boiling takes longer with the dechlorination
function and the appliance generates more
steam (be careful not to be scalded).
If there is no sufcient amount of water in the
appliance, the temperature LED indicators (24)
for 98°C and 65°C will ash together. In such
case, add more water to avoid overheating the
inside of the appliance.
Regularly check if the water level is above
the MIN level on the water level indicator (9).
Otherwise, frequent activation of the anti-
overheat protection may cause discolouration
of the inside of the appliance, smell, blown
fuses, and even a re.
POURING WATER AFTER BOILING (Fig. F)
1
Press the lock button (21) / , to unlock the
appliance. The lock light (22) will come on.
After turning on, the appliance is automatically locked
●
and the lock light (22) is on.
If within 10 seconds after pressing the lock button
●
(21)
( / ), the DISPENSE button (20) is not pressed or
if no cup or other vessel is placed under the dispensing
spout, the appliance will be locked again and the lock
light (22) will come off.
2
Pour water by pressing the DISPENSE button (20) or by
placing a vessel under the spout (11) so that it will touch the
dispensing unit with its rim.
After using the appliance (Fig. G)
1
Unplug the appliance.
2
Disconnect the power cord from the appliance plug-in
socket (13).
Allow the appliance to cool and remove the lid
●
(3)
in accordance with the description given in the previous
sections.
3
Pour out all the water through the spout (7).
Make sure that there is no water in the appliance.
●
Replacing the sealing ring (Fig. H)
If the sealing ring (5) breaks or loses its elasticity, steam may
come out from under the lid (3). In such case, replace the
sealing ring (5) with a new one as follows:
Remove the lid as shown in
●
Fig. C.
1
Unscrew the 4 xing screws.
2
Take out the inner lid (4).
3
Replace the sealing ring (5).
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer CK2320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer CK2320 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info