540075
90
Zoom out
Zoom in
Previous page
1/94
Next page
94
5
Place the lid on the fastening hooks of the container.
6
Block the lid.
7
Put the food pusher into the feed tube of the lid.
8
Plug in the appliance.
9
Switch on the motor using the button.
10
Set the desired speed using the buttons (the
default gear is 1).
Operating the slicing disc (Fig. E)
1
Put the selected slicing disc on the hooks of the disc
driver so that the blades that are to be used during operation
are on top.
2
Block the disc on the disc driver.
3
Place the accessory in the container so that it is
connected to the motor shaft.
4
Place the lid on the fastening hooks of the container.
5
Block the lid.
6
Plug in the appliance.
7
Switch on the motor using the button.
8
Set the desired speed using the buttons (the
default gear is 1).
The feed tube of the lid is used to add solid and liquid
ingredients to the container. It is divided into two parts
of different sizes. The wide part is for larger products and
the narrow part is for smaller products. Add the processed
products gradually, pushing them slowly and with a steady
thrust down the feed tube with the pusher.
Operating the liquidizer (Fig. F)
1
Insert the liquidizer on the on the fastening hooks of the
motor.
2
Block the liquidizer on the fastening hooks.
3
Place the food products to be processed inside the
container.
4
Make sure the gasket is properly installed in the groove
by the edge of the lid. The rectangular protrusion of the
gasket is used to remove the gasket from the lid.
5
Place the lid on top of the liquidizer.
6
Block the lid.
7
Press the cup-dispenser into the opening of the lid.
8
Plug in the appliance.
9
Set the desired speed using the buttons (the
default gear is 6).
10
Switch on the motor using the button.
NOTE: The TURBO mode can only be switched on
when the motor is operating.
Operating the dough kneader (Fig. G)
1
Insert the dough kneader container on the fastening
hooks of the motor.
2
Block the container on the fastening hooks.
3
Insert the gasket on the end of the feed tube of the
central container and turn it clockwise.
4
Attach the selected accessory (the dough hook or the
mixing whisk) to the motor shaft. If you want to use the
mixing whisk, you have to rst attach it (snap shot) to the
whisk head shaft.
5
Place the food products to be processed inside the
container.
6
Place the lid on the fastening hooks of the container.
7
Block the lid on the fastening hooks.
8
Plug in the appliance.
9
Switch on the motor using the button.
10
Set the desired speed using the buttons (the
default gear is 1).
NOTE: While using the dough kneader do not operate
the appliance above the 6 gear and in the TURBO
mode. It may cause damage to the attachment.
After operation (Fig. H)
1
Switch off the motor using the button.
2
Unplug the appliance.
3
Unblock the lid (after the attachment completely stops
rotating).
4
Open the lid.
5
Unblock the container.
6
Remove the container from the motor.
7
Detach the attachment.
8
Empty the container.
Cleaning and maintenance
Wash the parts of the food processor that have contact
the processed food thoroughly after each use.
Mixing warm water with dishwashing liquid makes the
cleaning of the liquidizer easier.
Wipe the housing with a damp cloth with dishwashing
liquid. Do not immerse the housing into water. Do not
wash it in the dishwasher.
Remove the dirt from the slots and the corners using
a bottle brush or a toothbrush.
Always store the food processor blade in the casing.
Plastic elements may discolor as a result of excessive
use. Do not teat this as a defect. Orange stains caused
by carrot juice can be easily removed with the use of
a cloth soaked with edible oil.
Dry all parts thoroughly after washing.
Pay special attention to transparent plastic parts. They
are very sensitive to strokes and dropping and may be
damaged.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 880.0LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 880.0LCD in the language / languages: English, Polish as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info