Manual Zelmer 687 (page 17 of 20) (English, Polish)

539611

Zoom out

Zoom in

1/20

23687-001_v01

Technical data

Technical parameters are given on the product’s data plate.

Allowed time of continuous work

of the meat mincer 10 minutes.

Required break before following use

of the meat mincer 30 minutes.

Noise of the meat mincer (L

) 80 dB/A.

The appliance features double electrical insulation (Class II)

and does not require grounding.

ZELMER meat mincers meet the requirements of the

following applicable standards.

The meat mincer complies with the requirements of the

following directives:

Low voltage device (LVD) – 2006/95/EC. –

Electro-magnetic compatibility (EMC) – 2004/108/EC. –

The product has been marked with the CE mark on the data

plate.

Description

The meat mincer consists of:

Drive unit – each drive of the machine is adjusted to the

assembly of each of the mincing set and the shredder

produced by ZELMER. There are some ventilation inlets

in rear casing of the 687 drives.

Switch

Lock button

Mincing set, which consists of:

Mincing chamber

Feed screw with assembled coupling

Double-side cutter

Screen with 4mm holes

ring collar

Food tray

Pusher

Equipment, which includes:

Screen with 8 mm holes

Sausage stuffer

Separator

TYPES OF ZELMER MEAT MINCERS

Below, you can see an assortment of equipment anticipated for the meat mincers, which the user manual refers to.

Typ Cutter knife

Screen

Sausage stuffer

Pasta and pastry

set

Shredder

2,7 4 8

687.5

● ○ ● ● ● ○ ○

687.54

● ○ ● ● ● ○ ●

● – basic accessories, ○ – additional equipment, which can be bought in shops, household appliances stores,

–

– unavailable accessories

The mincer is equipped with one mincing unit.

Mechanical safety device for the motor

Scroll

Clutch

Screw M5x20

The meat mincer is equipped with mechanical protection,

which secures the motor against any damage – teeth of

the coupling break, when the meat mincer is overloaded

(f. ex. when bones have entered into the mincing chamber).

The broken coupling should be replaced with a new one:

unscrew the coupling from the feed screw

●

(3),

remove the broken coupling

●

(2),

put on the new coupling

●

(2) and screw it (3).

Preparing the meat mincer to work

and the actuation of the appliance

Place the drive (1) unit close to the power network

socket, on a rm surface so as not to cover the ventilation

holes within the casing.

Before the rst use of the meat mincer, wash the

●

equipment elements.

Assemble the appropriate equipment and join it with the

●

drive unit.

Put the power cord into the supply network socket.

Turn the meat mincer on with the main switch (1a).

Operating the mincing set

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling facing inside.

Fit the knife (4) onto the pin of the scroll (3).

Place the screen (e.g. 5) over the knife so that the

protrusion in the mincer body will t into the groove in the

circumference of the screen.

Tightly t all the elements of the mincer unit.

Fit the assembled mincer unit onto the drive unit (1) and

turn it until you hear a click of the lock. It means that the body

has been properly installed.

Place the tray (7) on the mincer body (2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 687 in the language / languages: English, Polish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 687 Manual

Product: