539099
42
Zoom out
Zoom in
Previous page
1/42
Next page
46 581-002_v01
CUP (12)
Made of transparent material is used as a container when
mixing adapter is used.
OPERATION WITH MIXING ADAPTER (Fig. F)
You can use the mixing adapter for:
mixing liquids,
crumbling boiled vegetables and raw, soft fruit,
preparing different mayonnaise and pastes,
preparing soups for infants.
crushing ice (metal adapter only).
You can assemble the adapter after moving the cover.
1
Gently press the bolt and slide towards the direction
shown in the gure.
2
Insert the threaded part into the motor casing hole and
screw it turning right until you feel the refusal.
Inadequate screwing of the mixing adapter can
result in clutch damage or the adapter damage.
3
Put the adapter into the processed product and switch
the mixer on.
OPERATION WITH STAND INCLUDING TURNABLE BOWL
(Fig. G)
The stand with assembled motor part makes the operation
with whisks or mixers easy, as the user does not have to hold
the device.
The stand head driver automatically makes the head move
pendulum-like and simultaneously turns the bowl with the
mixed product.
You can use the stand with specially prepared whisks and
mixers only. The device equipped with stand includes also
one mixer and one whisk with toothed bar.
1
Insert the mixers or whisks into the motor casing
(as described above).
2
Assemble the drive in the stand head after moving the
cover (like during assembling the adapter) the following way:
Insert the drive fasteners (which are located near the holes
for whisks assembling) under the stand head fastener.
3
Turn the control clamp to the limit in such a way that the
hand is positioned vertically.
4
Press the fastener button and simultaneously deect the
stand head with the motor part back.
5
If the bowl with products a bit up and then insert it on the
three insertions and place it at the stand base.
6
Place the stand head with the motor part in horizontal
position (you will hear the clicking sound of fastener blocking
clamps).
Start-up the mixer with the switch lever and it will make
the bowl turn and the head with drive move pendulum-
like.
Never block or stop the oscillatory movement
during operation. It may cause damage to the
housing.
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his rights for modifying the product any
time in order to adjust it to law regulations, norms, directives, or due
to construction, trade aesthetic or other reasons, without notifying it in
advance.
After operation (Fig. H)
1
Turn off the mixer.
2
Pull the plug out.
Depending on assembled equipment:
3
Push the whisks or mixers out with a pushing button.
4
Disassemble the liquidizing disc from the whisk.
5
The mixing attachment should be disassembled in a way
opposite to its installation.
6
Deect the stand head with the motor part back.
7
Turn the clamp knob in counter clockwise direction as
much as possible and put the motor out of the head fasteners.
8
Wind the power cord on the motor part and put the last
winding under the insert.
Cleaning and maintenance
Remember to unplug before clearing and maintenance.
Clean the whisks and mixers with warm water with
cleaning agents.
Wash the mixing attachment by using it with clean, warm
water (after plugging the mixer in).
Clean the cogged rim of rotational bowl with dishes
cleaning brush.
Do not clean the mixing attachment in a dishwasher.
Turn the bowl upside down after cleaning and pour out
the water, which could remain under the cogged rim.
Dry the mixer equipment after cleaning and store in dry
place.
Clean the motor or stand casing with dump cloth and
then dry it.
Ecology – environment protection
Each user can protect the natural environment.
It is neither difcult nor expensive. In order to
do it: Put the cardboard packing into recycling
paper container, Put the polyethylene (PE)
bags into container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Please do not dispose into domestic waste disposal!!!
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 581 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 581 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info