539709

Zelmer 522.60 Manual

61
Zoom out
Zoom in
Previous page
1/64
Next page
61
Note: Make sure the housing is leveled.
d) Mark the position of the assembly holes on the wall.
e) Drill the holes marked on the wall using a drill with the diameter corresponding to the
enclosed rawlplugs, insert the rawlplugs in the holes and x the cooker hood housing
to the wall.
f) Install the aluminum anti-grease lter.
Installing the telescopic chimney column
In order to install the column (masking cover) of the cooker hood:
Insert the lower (B) and upper (A) chimney ●
(g. 1) on the cooker hood housing, slide the
masking cover apart for the desired height
and mark it on the wall.
Remove the upper chimney A and 65 mm ●
from the marked maximum point of the chim-
ney, place the chimney xing section D sym-
metrically to the middle line, mark the holes
on the wall, drill the holes, insert the rawlplugs
E and screw the xing section D.
Place the upper chimney A onto the lower ●
chimney B, slide to the previously set height.
Using the supplied screws F, screw the upper ●
chimney A to the xing section D and the lower
chimney B to the housing of the cooker hood.
Plug in and operation control
After plugging the appliance in (according to the previously described requirements),
check if the cooker hood lighting works and if its motor operates correctly.
After installing the cooker hood, the socket should be easily accessible in order to unplug
the appliance.
SETTING THE OPERATION MODE
Setting the extraction operation mode
During the extraction mode, air is extracted to the outside with a special duct. Remove
the coal lters with this setting.
The cooker hood is connected to an opening that extracts the air to the outside with a stiff
or exible duct with the diameter of 120 mm, 150 m and appropriate duct clamps which
are to be purchased in installation materials supply stores. The installation should be
performed by a qualied tter.
Setting the odor absorber operation mode
While using this mode, ltered air comes back to the room through openings on both
sides of the upper chimney. While using this mode, the coal lter should be installed, it is
also recommended to install an air exhaust n.
The speed of the fan
The lowest and medium speed settings are used in normal conditions and low cooking
fume intensity. The highest speed setting should be used only in case of an intense level
of cooking fumes e.g. during frying or grilling.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 522.60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 522.60 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info