Manual Zelmer 496 (page 47 of 50) (English, Polish)

540081

Zoom out

Zoom in

1/50

496-006_v01

When centrifuging juice of small fruits, use the bowl for

●

small fruits (7), put it on the chute.

Pour the extracted juice into glasses or cups prepared

●

in advance.

The juice collector (9) is equipped with foam separator

(10), which task is to stop the thicker particles of juice and

foam.

We recommend natural version of juice, less

clear. In order to obtain such a juice it is

necessary to remove the foam separator.

After operation (juice centrifuging) (Fig. E)

Switch the juice extractor off, turning the switch (a) to

position „0”.

Unplug the appliance.

After the motor stops start to disassemble the juice

●

extractor in order to wash the parts (see „Preparing for

operation”).

Remove the accumulated pulp from the pulp collector.

●

Prevent the excess of the pulp collector. The

excessive pulp can pour out while leaning the

collector during removing.

Juice extractor maintenance rules

Clean carefully after each usage, to prevent drying of

●

juice and fruit remains.

Remove the dirt from the corners with a bottle brush or

●

tooth brush.

Clean the motor with damped cloth sprinkled with

●

washing up liquid. Then dry it.

When water or juice getting into the motor, stop

operation immediately and bring the appliance

to service for inspection.

The following elements of the equipment: juice bowl,

●

insert, and lid, bowl for small fruits, pusher and the juice

collector including foam separator should be washed in

hot water with wash-up liquid.

You can clean them in dishwashers in maximum

●

temperature 60°C.

The exception is a lter

●

(4). It should be washed with

hard brush (13) only, which is included to this juice

extractor equipment. Do not use any metal brushes to

clean the lter!

Some elements can change their colour after long-term

●

usage. It is not a defect.

Colour from carrot can be removed by cleaning the

●

surface with a cloth immersed in edible oil.

Dry carefully all parts after cleaning.

●

Assemble the juice extractor according to instruction

●

mentioned above (see „Preparing for operation”).

Roll the supplying cord inside the base of juice extractor

●

motor.

Pay a special attention to transparent plastic

parts. They are the most sensitive for hits and

falls. They can be easily damaged then.

What to do when ...

The juice extractor does not work:

Bring the juice extractor to service agent.

●

The juice extractor extracts little juice or vibrates:

Use the

●

TURBO function. If the problem still exists, switch

the appliance off; clean the lter from accumulated pulp.

Additionally, empty the pulp collector if it is full.

In case of mechanical lter damage, implicitly replace it

●

with a new one.

Fruit and vegetable juices preparation

Fruit and vegetables for juice extraction, should be fresh

●

and washed carefully. Vegetables should be cleaned

from sand and soil with running water and peeled.

Publications concerning juice preparation, recommend to

deep the vegetables into water with salt and citric acid for

5 minutes. Such prepared vegetables do not get darker

during processing and their juice has natural colour.

Berry fruits should be washed directly before using, so

●

that they do not loose their freshness.

The selection of fruit and vegetables depends on the

●

season of the year, taste likes or health recommendations.

The way of preparation inuences the nutritive value.

Juices should be made of juicy kinds of fruits and

●

vegetables, which should be ripe and fresh, to get the

juice of the perfect avour and fragrance.

The following vegetables are good for juice preparation:

●

tomatoes, carrots, celeries, beetroots, parsleys, onions,

cabbages, cucumbers, black turnip, rhubarb, etc. You

can also prepare juice of lettuce, spinach, leek and other

vegetables as part of diet.

The following vegetables can be added to juices

●

chopped: radish, chives, green parsley, dill, cress.

Fruit juice can be made of almost all kinds of fruit.

●

Apples, peaches, apricots and plums should be blanched

●

with boiling water on the strainer.

Remove the stones from the fruit, which have it, to

●

prevent damages of the juice extractor.

Juice extracting of plums, blueberries, soft pears, apples

●

or other fruit is inconvenient. The esh of these fruit

becomes a spongy pulp, which blocks the lter holes.

You can use these fruit mixing a small amount of them

with other fruit or vegetables, it is also necessary to

clean the lter more often.

You can extract a small amount of grapes juice, but it is

●

necessary to put whole bunch to the chute after removing

ligneous stalk.

Cut the radical vegetables and hard fruit into pieces small

●

enough for the chute. Cut the apples into pieces (if they

are not small enough to put them whole into the chute)

without peeling and removing seed cavity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 496 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 496 Manual

Product: