Manual Zelmer 491 (page 50 of 54) (English, Polish)

538858

Zoom out

Zoom in

1/54

54 491-006_v01

Before shredding big pieces of the products

cut them into smaller ones – approximately

1 cm cubes.

Never disassemble the lid from the container

before the disc stops rotating.

Operational guidelines

The dismantling process should be done in reverse order

●

to assembly.

The operating time of the blended equipped with the food

●

processor cannot exceed 2 minutes. Allow the motor to

cool before proceeding.

Do not start – up the motor without accessories.

●

When nished, turn the appliance off and unplug it by

●

disconnecting the cable cord from the power outlet.

If the products stick to the blade or the walls of the

●

container:

Switch off the appliance. –

Remove the drive with the lid and container of ice or –

other products crusher.

Remove the products out of the mini food processor –

walls.

Re-assemble the appliance – as dened above, –

Continue the operation.

Approximate time for processing of selected

products for the recommended gear

Product

Recommended

gear

Processing

time

TURBO 20-30 s

TURBO 25-30 s

1/4

8-10 15 s

+TURBO

40 s + 5 s

( ×30)

15 10 s

+TURBO

15 s + 5 s

TURBO 30 s

You can shorten the processing time as you wish, then you

obtain other granulation of grinded products.

OPERATING THE FOOD PROCESSOR

The appliance characteristics

ZELMER Hand blender is equipped with a food processor

which is used for chopping, liquidizing, slicing, and grating

fruits and vegetables.

The application of the food processor accessories

Double – sided slicing disc – is used to slice fruit and

vegetable (raw, boiled) into thin or thick slices. The slicing

disc is round, with double -sided blades (one side for thin

slices, the other side for thick slices).

Double – sided chipping and puree disc – is used for

chipping and pureeing fruit and vegetables. Chipping and

puree disc is round, with double -sided blades (one side for

chipping i.e. carrots, celery boiled beetroots, the other side

for pureeing – i.e. for potato pancakes, beetroot salad).

Disc driver – is used for assembling discs (for slicing,

chipping and pureeing).

Pusher – is used for pushing product grinded with all discs

and closing the lid feed chute.

Use permanent guard for all shields of the food

processor.

The slicing and pureeing process cannot last

longer than 2 min. After this time, wait until

the motor cools down before next usage of the

blender.

Preparing the food processor to use

Before assembling on and removing the blender

drive out of the food processor, make sure that

the plug of the supplying cord is disconnected

from the mains supply outlet.

Wash the parts in contact with processed product before

rst usage.

Operate the blender so, that the closed/open markings

located on the appliance are well visible.

Operating the food processor (Fig. E)

Place the base of the food processor on rm, at and

dry surface. Insert the food processor container into the base

fasteners.

Lock the container.

Operation with food processor (slicing disc,

chipping and puree disc) (Fig. F)

Place the selected disc on the disc driver (double-sided

discs) so that the blades provided for operation are on

the top.

Insert the accessory inside the container, so that it is

connected with the drive shaft.

Insert the permanent guard. The guard can be assembled

200 g

(500 ml)

20 g

(500 ml)

300 g

(500 ml)

250 g

(500 ml)

200 g

(500 ml)

1 cm

250-300 g

(400-500 ml)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 491 in the language / languages: English, Polish as an attachment in your email.

The manual is 3,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 491 Manual

Product: