540088
46
Zoom out
Zoom in
Previous page
1/50
Next page
48 486-005_v01
Switch the juice extractor off immediately, when you
notice strong vibrations or rotation decrease. Clean the
lter and its casing.
Stop the operation and unplug the appliance when
the product is blocked in chute or pulping blade.
Unblock it.
Stop the operation immediately and unplug the
appliance when any liquid gets into the motor. Bring
the juice extractor to the service for inspection.
Do not expose the juice extractor to temperatures over
60°C.
Do not leave the appliance plugged unattended.
Do not immerse the motor in water neither clean
it under running water.
Do not clean the casing with aggressive detergents,
such as emulsion, milk, paste, etc. They can remove
the graphic symbols such as: scales, labels, caution
signs, etc.
Do not overload the appliance with extensive amount
of product or do not push it to strong (with a pusher),
because a sudden increase of juice amount in the bowl
spout can cause the juice overow out of the lid or into
pulp collector.
Place the motor body near a socket on a at, stable
surface so that the vent holes of the appliance are not
covered.
Tip
Product information and tips on its use
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions shall change.
Unplug after operation.
Clean the metal parts, especially the lter including the
sharp pulping blade with soft brush.
To make the maintenance easier, you can put the
plastic bag into the pulp collector, which you can
remove to the rubbish bin after operation.
Before the rst use, wash thoroughly all elements of
the equipment.
Specications
The technical parameters are quoted on the nameplate of
the product.
Admissible time of non-stop operation 15 minutes
An interval between repeated operation 30 minutes
An interval between repeated TURBO usage 10 seconds
Noise generated by the appliance (L
WA
) 75 dB/A
Speed range: I gear, II gear
The juice extractor type 486 is built in I class insulation and
it is equipped with supplying cord with grounding wire and
grounding plug.
It must be plugged into grounded receptacle.
The juice extractor meets applicable norms requirements.
The appliance meets the requirements of the directives:
Low voltage electrical device (LVD) – 2006/95/EC.
Electromagnetic compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the nameplate.
INFORMATION ON FRUIT AND VEGETABLES
Fruit/vegetables Centrifuging speed
Pineapples II
Blueberries I
Peaches I
Beetroots I
Pears I
Apples I
Cabbage II
Fennel I
Raspberries I
Carrots II
Melons I
Apricots I
Nectarines I
Cucumbers I
Kiwi I
Tomatoes I
Celery II
Grapes I
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 486 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 486 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info