540086
63
Zoom out
Zoom in
Previous page
1/66
Next page
65
Dear Customer!
Please, read these instructions carefully. Special attention
should be paid to the information concerning safety in order
to avoid accidents and damages of the appliance. It is
recommended to keep this manual for further use.
Characteristics of the juice extractor
The juice extractor is an electrical appliance for fast fruit and
vegetable juice centrifuging with automatic separation of
pulp. The raw material is rst pulped and next the juice is
centrifuged from the pulp. A simple and easy operation of the
appliance enhance its utility advantages. An electronic speed
stabilizer ensures a constant rotation speed irrespectively of
loading, which guarantees obtaining of juice even consistency.
The juice extractor is equipped with 2 centrifuging speeds
(for hard and soft fruit) which were chosen to obtain the
optimal quality parameters for squeezed juices. Keeping the
maximal content of fruit pulp and bre containing vitamins,
pectin, enzymes and minerals in the juice results in its lower
clarity. This is an intended effect since the Producer of the
juice extractor decided that it is more important to keep the
highest possible nutritious, health and dietetic values of the
obtained fruit than its clarity. The juice extractor is additionally
equipped with lter self-cleaning function. After pressing the
turbo button, the engine works for about 3 seconds with high
rotation. High rotation helps to clean the lter in the event of
vibrations resulting from excessive pulp accumulation. The
turbo function may be used in 10-second intervals only. The
juice extractor may work for 15 minutes without any break.
The quantity of juice obtained, e.g. from 1 kg of a raw material
depends on its freshness as well as on lter cleanliness and
the state of the pulping blade. The parts in contact with the
processed raw materials are made of materials permitted for
contact with food.
Safety operation instructions
Do not disconnect the plug from the socket by pulling
a cord.
Before starting the appliance, uncoil appropriate amount
of power supplying cord.
Place the motor body near a socket on a at, stable surface
so that the vent holes of the appliance are not covered.
The appliance must be plugged only to an alternating
current 230 V grounded socket.
Do not operate the appliance if the power supplying cord
is damaged or the casing is visibly damaged.
If the non-detachable part of the cord is damaged, it should
be replaced by the producer or at a proper service point
or by a qualied person in order to avoid any hazards.
The appliance can only be repaired by qualied service
personnel. Improper servicing may cause a serious
hazard to the user. In case of defects please contact
a qualied service center.
The appliance is intended for domestic use.
In case it is
used for food business purposes, the warranty conditions
shall change.
Before the rst use, wash thoroughly all elements of the
equipment.
Turn off the device and unplug it from an outlet
before replacing the equipment or approaching
moving parts during use.
Before cleaning, assembling or disassembling the
appliance, always unplug it rst.
Immediately stop the operation and unplug the appliance
if any liquid gets into the motor. Return the appliance
to an authorised service facility for examination and
servicing.
Do not expose the appliance to temperatures exceeding
60°C.
Do not turn on the appliance if empty, without any
products in.
Be particularly cautions when the juice extractor is used
in the presence of children.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Do not leave the appliance unattended when it is plugged
to a socket.
Do not put the appliance on wet surface.
Unplug the appliance after use.
Do not immerse the juice extractor’s motor in water, nor
rinse it with running water.
Do not use aggressive detergents for washing the casing,
such as emulsion, cleaning milk or paste which may,
among others, remove informative symbols and signs.
Do not use the juice extractor if the spinning strainer is
damaged.
Make sure that the lid is clamped securely in place before
motor is turned on.
Do not unfasten clamps when the juice extractor is in
operation and the strainer is spinning because the safety
system will cause the appliance to stop.
Use the pusher only to push food into the feeder opening.
Immediately turn off the juice extractor if you notice
strong vibrations or the rotation speed is reduced. Clear
the strainer and its cover.
Turn the motor off and unplug the appliance if food is
blocked in the feeder opening or on the grinding blades.
Remove the cause of blocking.
Use hard bristle brush for cleaning the strainer with sharp
grinding blade.
Do not use the juice extractor without pulp collector.
Do not overload the appliance with extensive amount
of product or do not push it to strong (with a pusher),
because a sudden increase of juice amount in the bowl
spout can cause the juice overow out of the lid or into
pulp collector.
EN
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 477 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 477 in the language / languages: English, Polish as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info