Manual Zelmer 41Z012 (page 47 of 52) (English, Polish)

538929

Zoom out

Zoom in

1/52

47GW41-001_v01

PLUGGING TO A POWER SOURCE

1. Place a compatible utensil on the induction stove.

2. Plugging the cooker to a power source is signalized by a single sound

signal. At this time all functional indicators, as well as the heat power

indicator will ash for a second before going off. The power on/off

indicator will be ashing. The only key working at that stage is the

power on/off button – the rest of the keys remain disabled.

3. When the cooker is plugged to a power source, push the power on/off

button. You will hear a single sound signal and the display panel will

indicate “----”. The cooling fan is now off, which means that the cooker

is now ready for use. If within one minute from plugging the cooker you

do not use the cooker in any way, the device will automatically turn

itself off signaling it with a sound.

4. Within one minute after pressing the power on/off button you can select

a function by pressing the MENU selection key. The selected function

will lit on the display panel. If within one minute from plugging the

cooker you do not activate any function, the device will automatically

turn itself off.

5. If there is no utensil on the induction cooker after selecting a function,

you will hear a pulsating sound signal. The display panel will indicate

an “E1” error code symbol. The function indicator will lit permanently

and the heat power indicator will be pulsating. If within one minute

no utensil will be put on the cooker, the device will automatically turn

itself off. If, however, within that minute a utensil will be placed on the

cooker, the device will check whether the utensil is compatible and after

3 seconds will start the assigned cooking function.

OPERATION INSTRUCTIONS

ATTENTION: Always use a vessel intended for induction cooker,

adequate to each function described below. The diameter of the

inductive utensil bottom should be 12-24 cm.

Boil water function

1. Turn on the cooker by pressing the power on/off button. Using the

MENU key select the Boil water function. The boil water function

indicator will lit up. Maximum power is used for the process of boiling

water, consequently the display panel will show the power level of

“2000”. Power (W) indicator will be lit.

As long as the boiling process continues, all the heat power indicators

will be on. Other indicators will remain off. The Boil water function may

be changed to other functions by pressing the MENU key.

2. If, during the boiling process, a utensil will be taken off the induction

cooker or it will not be there in the rst place, the device will automatically

turn itself off.

3. To set time for the boiling process, press the TIMER key (you can select

from 00:01 to 23:59 minutes). The set time will be counting down on the

display panel. If the settings were not changed, the default time will

be 15 minutes (in such a case the display panel will show power and

not time). Furthermore, if you change the time settings, the Power (W)

indicator will not be lit up and the heat power indicators will ash on

a rotation basis from left to right until the process is over.

4. In order to check the level of power, press the MENU key. Power (W)

indicator will lit up and the display panel will show information about

the power level. After ca. 5 seconds the display panel will go back to

showing timer countdown.

5. After the completion of the process, you will hear a sound signal and

the device will automatically turn itself off. The function does not support

the Keep warm mode. You will be informed about the end of the boiling

process by a ten-times sound signal.

6. At any moment the cooker may be turned off by pushing the Power on/

off button.

Heat milk function

1. Turn on the cooker by pressing the Power on/off button. Using the

MENU key select the Heat milk function. The Heat milk function

indicator and the Power (W) will lit up. Furthermore, four LED on the

display panel, as well as all heat power indicators will ash on a rotation

basis from left to right until the process is over. All other indicators will

be inactive.

2. In this function the device controls both power and temperature. It is not

possible to adjust them (no reaction to pressing the “+” or “-” keys). The

Heat milk function may be changed at any time to other functions by

pressing the MENU key.

3. The function is set for ca. 15 minutes. You will be informed about the

end of the process by a ten-times sound signal. The cooker will check

the temperature inside the utensil. When it reaches 60°C to 80°C, the

cooker will automatically go into the Keep warm mode. The LED on the

display panel will form a “b” symbol. After 2 hours the Keep warm mode

will be turned off.

4. The Power (W) indicator will be lit throughout the process. If you take

the utensil off the cooker or it will not be there, the indicator will go off.

Putting the utensil on the cooker will automatically result in turning the

Power (W) indicator on.

5. At any moment the cooker may be turned off by pushing the Power on/

off button.

Chaﬁng dish function

1. Turn on the cooker by pressing the Power on/off button. Using the

MENU key select the Chang dish function. The Chang dish function

indicator and the Power (W) will lit up. The default power of the function

is “2000”. All power indicators will be will up. Press the “+” or “-” keys

to increase or decrease the power level. You can choose power from

the following levels: 100, 300, 600, 800, 1000, 1200, 1400, 1600, 1800,

2000. The Chang dish function may be changed at any time to other

functions by pressing the MENU key.

2. To set time for the process, press the TIMER key (you can select from

00:01 to 23:59 minutes). The time set will be counting down on the

display panel. If the settings were not changed, the default time will

be 15 minutes (in such a case the display panel will show power and

not time). Furthermore, if you change the time settings, the Power (W)

indicator will not be lit up and the heat power indicators will ash on

a rotation basis from left to right until the process is over.

3. In order to check the level of power, press the MENU key. Power (W)

indicator will lit up and the display panel will show information about

the power level. After ca. 5 seconds the display panel will go back to

showing timer countdown.

4. The automatic anti-overheating safeguard is set to 340°C ±20°C.

If a sensor indicates that the temperature has reached the maximum

safety level or there is a short-circuit, the cooker will automatically turn

off. The display panel will show an “E6” error code symbol. Furthermore,

if there is no water in the utensil, the cooker will automatically turn

itself off within 3 minutes. When the power is at its maximum level, the

cooker will disable the “+” key. Consequently, when the power is at its

minimum level, the cooking will not respond to pressing the “-” key.

5. The function does not support the Keep warm mode. You will be

informed about the end of the process by a ten-times sound signal.

6. At any moment the cooker may be turned off by pushing the Power on/

off button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 41Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zelmer 41Z012

Zelmer 41Z012 User Manual - English, Polish - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 41Z012 Manual

Product: