Manual Zelmer 26Z012 (page 36 of 40) (English, Polish)

539762

Zoom out

Zoom in

1/40

36 GW26-005_v02

Assembling and disassembling of heating plates

Removing heating plates

Remove the lower heating plate holding the handles from both sides –

and pressing the releasing button (6).

Remove the upper heating plate holding the handles from both sides –

and pressing the releasing button (6).

Inserting heating plates

Insert two protrusions of the plate into the grooves in the rare part –

of the base or the cover, and then press the plate towards the base,

until it clicks. Make sure the heating plates are properly assembled.

Handling and operation

Before rst usage:

remove form the package, –

check if the voltage on the nameplate corresponds with the voltage of the mains, –

clean the appliance wiping the outer and inner surface with a damp cloth or paper towel; wash the –

plates in water with a gentle detergent (see “Cleaning and maintenance”),

assemble the dried plates in the appliance, –

switch it on for approximately 15 minutes in order to remove all remains from manufacturing process. –

Switch off the toaster then, and let it cool down completely and wash the plates again.

For further usage:

place the toaster on dry, at surface near the mains supply outlet, –

when you toast rst time on given day, cover carefully all the surface of both plates with vegetable oil or –

melted roasting fat using the brush for dough, before you start, then heat the appliance,

insert the plug into the mains supply outlet (both pilot lights –red and green – shall glow), –

wait until the green light is off (it lasts about 3–5 minutes), which means that heating plates reached the –

toasting temperature,

since then the green light shall go on and off – which means that the toaster keeps the desired toasting –

temperature.

Preparing the sandwiches (heating plates for sandwiches)

open the toaster, –

put the slice of toast bread, app. 1 cm trick with its buttered side to the lower plate, –

put other ingredients on the slice, –

cover the ingredients with the second slice of bread with buttered side to the top, and close the toaster –

carefully.

In case it is difcult to close the toaster, remove the exceeding ingredients. The toaster can not be

closed by force, as it can result in damage.

open the toaster after some minutes (the toasting time depends on the recipe you apply to prepare the –

products and on the user’s likes) and carefully remove the toasted sandwich.

Preparation of wafers (heating plates for wafers)

when you toast rst time on given day, cover carefully all the surface of both plates with vegetable oil or –

melted roasting fat using the brush for dough, before you start, then heat the appliance,

pour the dough on exactly on the centre of the wafer plate, so that it covers the lower plate and –

distribute it evenly on whole surface,

close the cover, but – do not lock the hook (closing the hook does not allow the wafers grow),

bake the wafers about 7–10 minutes, do not open the toaster during rst minute of baking, –

when the wafers are ready, remove them carefully, not to touch the heating surface with a sharp, –

pointed or metal object.

Preparation of grill (heating plates for grilling)

cover carefully all the surface of both plates with vegetable oil or melted roasting fat using the brush for –

dough, before you start, then heat the appliance,

put the products on the lower heating plate and close the cover. – The toaster can not be closed by

force, as it can result in damage.

after some minutes (the toasting time depends on the recipe you apply to prepare the products and on –

the user’s likes) open the toaster and remove the grilled products carefully.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 26Z012 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zelmer 26Z012 Manual

Product: