538870
29
Zoom out
Zoom in
Previous page
1/32
Next page
29GW17-034_v01
The rising of the water level in the kettle is
delayed in relation to the speed of pouring. It
is caused by the lter slowing down the speed
of the ow.
This can be prevented by pouring the last
portions of water extremely carefully before
reaching the maximum level on the indicator.
If an empty kettle is switched on, it will be
switched off by a thermal device automatically.
To turn the kettle on again after it has cooled
down (approx. 15 minutes), take it off the base,
replace it and turn the kettle on by pressing
the switch. To accelerate the cooling of the
kettle, pour cold water into the kettle.
When the water has reached the boiling point, the kettle switches off
automatically, the switch returns to its starting position – the light comes off.
If further use of the kettle is anticipated, it is not necessary to remove the
plug of the connecting cord from the power socket.
Cleaning and maintenance
Always clean a cold kettle!
Remove the plug of the connecting cord from the power socket.
Take out the lter.
Clean the outside surfaces with a soft cloth moistened with washing-up
liquid.
To remove the build-up of hard water lm from the outside and inside
walls of the kettle, wipe them with a cloth moistened with vineger.
Rinse the kettle with fresh water.
Filter replacement – descaling
If scale builds up on the bottom of the kettle, it needs to be removed. Use
6% or 10% vinegar for this purpose.
Open the lid.
Take out the lter from socket “A” and from the runners by moving it in
the direction shown by “2”.
Wash it under running water.
Pour 0.5 l of vinegar into the kettle and turn on the kettle.
Boil the vinegar and leave it in the kettle for about 30 minutes.
Pour the vinegar out and rinse the
kettle with fresh water.
Fill up the kettle with fresh water,
boil the water and pour it out after
is has boiled.
Repeat the procedure if there still is
scale on the bottom.
When the procedure is nished,
replace the ter in the kettle
following the procedure of taking it
out in reverse order.
Negligence in descaling the kettle
may result in its damage.
Ecology – Environment protection
Each user can protect the natural environment. It is neither
difcult nor expensive.
In order to do it: put the cardboard packing into recycling
paper container; put the polyethylene (PE) bags into container
for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
removing
the lter
replacing
the lter
The manufacturer/importer does not accept any liability for any damages resulting
from unintended use or improper handling. The manufacturer/importer reserves
his rights to modify the product any time in order to adjust it to law regulations,
norms, directives, or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zelmer 17Z015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zelmer 17Z015 in the language / languages: English, Polish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info