522956
46
Zoom out
Zoom in
Previous page
1/68
Next page
10
ventilation and/or cooling system for long periods.
2.3.2 ComfoControl fi lter warning
If the ventilation system’s fi lters require replacement (or
cleaning), then the “FILTERS – REPLACE FILTERS” warn-
ing appears on the ComfoControl display.
To replace (or clean) any fi lters, please refer to
your ventilation system’s user manual.
Once the ventilation system’s fi lters have been replaced
(or cleaned), then follow the steps below to delete the fi lter
warning from the ComfoControl display:
Press
” to go to “SYSTEM STATUS”.
Press ” to delete the “FILTERS– REPLACE FIL-
TERS” warning.
2.3.3 Information about ComfoControl status
In the absence of error message, you will see:
“CHECK: OK” on the ComfoControl display.
Information on the status of your ventilation and/or cool-
ing system can then be accessed. This goes as follows:
Press
” to go to “SYSTEM STATUS”.
The “SYSTEM STATUS” screen displays all the system
data on the ComfoControl.
Press ” to return to the main screen.
2.4 End of useful life
Consult your supplier as to what you should do with the
ComfoControl at the end of its useful life. If the Comfo-
Control cannot be returned to the supplier, avoid dis-
posing of it with the industrial waste, and ask your local
council about the options for recycling the components
or processing the materials in an environmentally friendly
manner.
3 For the Fitter
This chapter describes how to fi t the ComfoControl.
3.1 Installation conditions
In order to determine whether the ComfoControl can be
installed in a certain area, the following aspects must be
taken into account:
The ComfoControl must be mounted 1.5 metres from
the fl oor.
The ComfoControl must be fi tted to allow suffi cient air
to circulate. For example, not behind a cupboard, or in
a corner.
The ComfoControl must not be located close to a heat
source, such as radiators, TVs, lamps, etc. Direct sun-
light must also be avoided.
The ComfoControl must not be located close to a cold
source, such as cold-water pipes or unheated walls
(due to poorly heated areas on the other side of the
wall), etc.
The following facilities must be available in the living
area concerned:
Flush-fi t casing for the ComfoControl.
12V DC power supply from the
ventilation system.
A/B communication cable from the
ventilation system.
3.2. Installing ComfoControl
3.2.1 Transport and unpacking
Take care when transporting and unpacking the Com-
foControl.
Make sure the packing material is disposed of in
an environmentally friendly manner.
3.2.2 Checking the delivery
Contact your supplier immediately in case of damage or
an incomplete delivery. The delivery includes:
• ComfoControl.
Mounting bracket (fi tted to the bottom of the Comfo-
Control).
• Connectors (fi tted to the rear of the ComfoControl on
the PCB).
• User manual.
English
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zehnder ComfoControl Luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zehnder ComfoControl Luxe in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info