671480
50
Zoom out
Zoom in
Previous page
1/102
Next page
Print Operations
Sending Files to the Printer
38
980608-001 Rev. C GK420d™ User Guide 8/4/10
Sending Files to the Printer
Graphics, fonts and programming files can be sent to the printer from the Microsoft Windows
operating systems by using the Zebra Setup Utilities (and driver), ZebraNet™ Bridge or
Zebra
®
ZDownloader found on the user's CD or at
www.zebra.com
. These methods are
common for both programming languages and the G-Series printers.
Print Meter
The G-Series printer has the capability to report printhead maintenance alerts. The printer can
provide cleaning and early warning of end of calculated printhead life alerts. If the RTC (Real
Time Clock) is installed in the printer, the printhead life and history reporting will also include
the date. By default, print metering alerts are disabled.
Many of the print meter messages and reports are customize able. See the ZPL or EPL
Programming Guides for more information on the Print Meter.
To active the Print Meter Alerts, send one of the following commands to the printer:
EPL command oLY
ZPL command ^JH,,,,,E
EPL Line Mode
Your direct thermal printer supports Line Mode printing. EPL Line Mode printing is designed
to be command compatible with EPL1 programming language used in early model LP2022
and LP2042 printers. The Zebra 2800 series direct thermal printers also included Line Mode
printer language support. The G-Series continues Zebra’s support of Line Mode.
Line mode printing is ideal for basic retail (point of sale - POS), shipping, inventory, work
flow control, and general labeling. EPL printers with Line Mode, are versatile and are capable
of printing a wide range media and bar codes.
Line Mode printing only prints single lines the height of the largest element present in the line
of text and data - bar code, text, a logo or simple vertical lines. Line mode has many
limitations due to the single line of print: no fine element placement, no overlapping elements,
and no horizontal (ladder) bar codes.
Line Mode printer operation is entered by sending the printer the EPL OEPL1 command.
See the EPL Programmers Guide (Page Mode) or the EPL Line Mode Programmers
Guide.
Line Mode printer operation is exited by sending the printer the escOEPL2 Line Mode
command. See the EPL Line Mode Programmers Guide.
With Line Mode active, ZPL and EPL (EPL2) Page Mode programming will be processed
as Line Mode programming and data.
With the default ZPL and EPL (EPL2) Page Mode active, Line Mode programming will
be processed as ZPL and/or EPL programming and data.
Verify printer programming modes by printing out a printer configuration.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zebra GK420D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zebra GK420D in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info