671305
3
Zoom out
Zoom in
Previous page
1/20
Next page
The operating water pressure (minimum and maximum) must be
between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).
The ventilation openings in the base (if applicable) must not be
obstructed by a carpet.
The appliance is to be connected to the water mains using the
new supplied hose-sets. Old hose sets must not be reused.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Before maintenance, deactivate the appliance and disconnect
the mains plug from the mains socket.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Safety instructions
Installation
Remove all the packaging and the transit
bolts.
Keep the transit bolts. When you move the
appliance again you must block the drum.
Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.
Make sure that the floor where you install the
appliance is flat, stable, heat resistant and
clean.
Make sure that there is air circulation
between the appliance and the floor.
Adjust the feet to have the necessary space
between the appliance and the carpet.
Do not install the appliance where the
appliance lid can not be fully opened.
Electrical connection
The appliance must be earthed.
Always use a correctly installed shockproof
socket.
Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
Do not touch the mains cable or the mains
plug with wet hands.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Only for UK and Ireland: The appliance has a
13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.
This appliance complies with the E.E.C.
Directives.
Water connection
Make sure not to cause damage to the water
hoses.
www.zanussi.com 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWY 61005SA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWY 61005SA in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info