447417
15
Zoom out
Zoom in
Previous page
1/24
Next page
Selecting options
You must select the different options after selecting the
programme and before pressing the “Start/Pause” push-
button (see “Programme table”). Press the desired but-
ton(s) ; the corresponding lights come on. If pressed
again, the lights go out. If one of the options is not com-
patible with the selected programme, “Err” flashes on
the display and the “Start/Pause” pushbutton flashes red.
“ Prewash ” option
The appliance runs a prewash at 30°C max.
“ Super quick ” option
The washing time will be reduced depending on the pro-
gramme selected.
“ Extra rinse ” option
The washing machine will add one or more rinses dur-
ing the cycle. This option is recommended for people
with sensitive skin and in soft water areas.
“Delay start”
This option allows you to delay the start of a wash pro-
gramme by 30, 60, 90, 2 hours to 20 hours. The selec-
ted time appears on the display for a few seconds.
You can change or cancel the delayed start time at any
time before you press the “Start/Pause” button, by press-
ing the “Delay start” button again (
indicates imme-
diate start)
If you have already pressed the “Start/Pause” button
and you want to change or cancel the delayed start, pro-
ceed as follows :
To cancel the delayed start and start the cycle imme-
diately, press “Start/Pause” and then “Delay start”.
Press “Start/Pause” to start the cycle.
To change the timer delay period, you must go
through the “Stop”
position and reprogramme
your cycle.
The lid will be locked during the delayed start time. If
you need to open it, you must first pause the appliance
by pressing the “Start/Pause” button. After closing the
lid again, press the “Start/Pause” button.
Start of the programme
Press the “Start/Pause” pushbutton to start the cycle ;
the corresponding light will come on green and the
“ Door locked ” light comes on.
It is normal for the programme selector to remain sta-
tionary during the cycle. The remaining time appears on
the display. If a delayed start has been selected, the
countdown appears on the display.
Interrupting a programme
Adding washing during the first 10 minutes
When the “ Door locked ” light is off, you can add wash-
ing by proceeding as follows. Press the “Start/Pause”
pushbutton : the corresponding light will flash green
while the appliance is paused. The lid can only be
opened around 2 minutes after the washing machine
has come to a stop. Press the “Start/Pause” pushbutton
again to continue the programme.
Modifying the programme in progress
Before making any changes to the current programme,
you need to pause the washing machine by pressing the
“Start/Pause” pushbutton. If the modification is not pos-
sible, “Err” flashes in the display and the “Start/Pause”
pushbutton flashes red for a few seconds. If you still de-
cide to change the programme, you must cancel the cur-
rent programme (see below).
Cancelling the programme
If you want to cancel the programme, turn the pro-
gramme selector to the “Stop”
position.
End of the programme
The washing machine stops automatically ; the “Start/
Pause” button goes out and
flashes on the display.
The lid can only be opened around 2 minutes after the
washing machine has come to a stop. The “ Door
locked ” light is off. Turn the programme selector to the
“Stop” position
. Remove washing. Unplug and
close water inlet tap.
Stand by : once the programme has finished after a few
minutes the energy saving system will be enabled. The
brightness of the display is reduced. By pressing any
button the appliance will come out of the energy saving
status.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWY 2120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWY 2120 in the language / languages: Dutch as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info