549065
11
Zoom out
Zoom in
Previous page
1/20
Next page
Press the Start / Pause button :
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1. Press the Start / Pause button to set the
appliance to PAUSE.
2. Press the Delay Start button one time, the
indicator of the set delay goes off.
3. Press the Start / Pause button again to
start the programme immediately.
Interruption of a programme
1. Press the button Start / Pause. The indica-
tor flashes.
2. Press the button Start / Pause again. The
washing programme continues.
Cancel a programme
1.
Turn the programme knob to
to cancel
the programme and to deactivate the appli-
ance.
2. Turn the programme knob again to activate
the appliance. You can set a new washing
programme then.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1. Press the button Start / Pause. The indica-
tor flashes.
2. Change the options.
3. Press the button Start / Pause again. The
programme continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked.
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
Open the appliance door when the delay
start operates:
1. Press the button Start / Pause to set the
appliance to PAUSE.
2. Wait for some minutes and then open the
appliance door.
3. Close the appliance door.
4. Press the button Start / Pause and the de-
lay start continues to operate.
To open the appliance door when the
programme operates:
1.
Turn the programme knob to
to deacti-
vate the appliance.
2. Wait for some minutes and then open the
appliance door.
3. Close the appliance door.
4. Set the programme again.
At the end of the programme
The appliance stops automatically.
The Start / Pause button indicator goes off.
The End indicator is on.
1.
Turn the programme knob to
to deacti-
vate the appliance.
2. Remove the laundry from the appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent the mildew
and odours.
4. Close the water tap.
The washing programme is completed,
but there is water in the drum:
The drum turns regularly to prevent the crea-
ses in the laundry.
The door stays locked and the start button
indicator flashes.
You must drain the water before you can
open the door.
To drain the water:
1. Set the Drain or the Spin programme.
2. Press the Start / Pause button. The appli-
ance drains the water and spins.
3. When the programme is completed:
The Start / Pause button indicator goes
off and the End indicator is on.
11
www.zanussi.com
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWG 6120 K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWG 6120 K in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info