304888

Zanussi zwg 3164 Manual

66
Zoom out
Zoom in
Previous page
1/79
Next page
66
ENGLISH
Use
Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.
1 “Prélavage/Voorwas” (Prewash)
“Court/Kort” (Quick wash) button
By depressing this button you can select two different
options:
•
Prélavage/Voorwas: Select this option if you
wish your laundry to be prewashed before the
main wash (not available for wool/handwash).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
•
Court/Kort: a very short cycle for cotton,
synthetic or delicate items (not avaiable for
wool/handwash) that have been used or worn for
a short time.
The light corresponding to the selected option
illuminates.
This option cannot be used with the Eco option (B-
programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. recommended load for cotton 3 kg.
Prélavage/Voorwas and Court/Kort cannot be
selected together.
2 “Reduction essorage/Lage toeren”
(Spin reduction) button
By depressing this button the spin speed is reduced
as follows:
- programmes for cotton and linen: from 1400 to
750 rpm (ZWG 3144); from 1600 to 750 rpm (ZWG
3164);
- programmes for synthetics, wool and
handwash: from 900 to 450rpm;
- programmes for delicates: from 700 to 450 rpm.
3 “Rinçage+/Spoelen+” (Extra Rinse)
button
The Extra Rinse option can be selected with all
programmes except the wool/handwash
programme. The machine will perform 2 additional
rinses. This option is recommended for people who
are allergic to detergents, and in areas where the
water is very soft.
4 “Départ/Pause / Start/Pauze”
(Start/Pause) button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
1 2 3 4 5 6 7
Start/
Pauze
ZWG 3164
Prélavage
Voorwas
Court
Kort
Rinçage +
Départ/
Pause
Spoelen +
Départ
différé
Start
uitstel
Fin
Einde
A
D
B
C
L
F
G
H
J
K
M
N
P
Q
R
ELECTRONIC
1600 rpm
Reduction
essorage
Lage
toeren
8 H
4 H
2 H
12 H
Control panel
132982110GB.qxd 17/01/2006 14.59 Pagina 66 (Nero/Process Black pellicola)
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi zwg 3164 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zwg 3164 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info