Manual Zanussi ZWF1430S (page 8 of 27) (English)

24643

Zoom out

Zoom in

1/27

• Delay start, a time value indicated in hours and

selected by means of the relevant button.

The delay time is displayed for 3 seconds, then the

duration of the selected programme reappears.

After you have pressed the Start/Pause button, the

countdown begins, and the delay time value decreases

by one unit every hour.

You can delay the start of the selected programme by

up to 23 hours in one hour intervals.

• An incorrect option selection has been made: this is

indicated by the message Err when a function

incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible

warning signal.

• An alarm code indicates a fault in the machine

operation (see the relevant chapter on page 19).

9 START/PAUSE button

This button has two functions:

• Start: after you have selected the desired programme

and options, press this button to start the washing

machine. The light above the button will stop flashing

and remain lit.

E20

If you have selected a delay time by means of button

11, the countdown will begin and will be shown on the

display.

• Pause: when you press this button again, the

programme in progress is interrupted. The light above

the button will start flashing. To restart the programme,

press the button again.

When you PAUSE the cycle, and it becomes possible

to open the door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important! You must set the washing machine to Pause

before you make any change in the programme in

progress.

10 SKIP/RESET button

This button performs two functions:

- Clears the memory

- Selects special programmes

At the end of every programme the Reset button must be

pressed once or repeatedly to clear the programme

memory. This will be confirmed by three dashes,

flashing in the display.

If the previous programme is not cleared, the display

will show a “

0” flashing and an audible signal will

sound, when you switch the machine on.

Selecting a special programme:

A wash programme must be selected in the normal way.

(Start button not pressed)

The SKIP button is then used to cancel or advance the

programme to the required phase.

The SKIP button can only operate when the programme

is in pause.

A normal wash cycle consists of the following phases,

Wash - Rinses - Spin and is confirmed by the

illumination of the corresponding LED,s.

132989150.qxd 13/03/2004 09.00 Pagina 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1430S in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZWF1430S Manual

Product: