24589
6
Zoom out
Zoom in
Previous page
1/28
Next page
1 Detergent dispenser drawer
2 Programme selector dial
The selector dial is divided into the following sections:
Cottons (blue colour),
Synthetics (green colour)
Delicates (gray colour)
Wool (Handwash) (gray colour)
Rinses, Drain, Spin and Mini 30° (green colour)
OOff = Reset/Switching the machine off
The selector dial can be turned either clockwise or
anticlockwise.
E- position corresponds to the ENERGY SAVING
programme for cotton and synthetics and position “O
Off to Reset programme/Switching off of the machine.
corresponds to a cold wash
At the end of the programme the selector dial must be
always turned to position “OOff , to switch the
machine off .
Attention!
If you turn the programme selector dial to another
programme when the machine is working, the warning
«Err» message appears for 3 seconds on the display
while the buzzer sounds 3 times .
95°
60°
40°
30°
60°
30°
Cottons
30°
Rinses
Wool
40°
Delicates
40°
Spin
Drain
Off
40°
30°
Synthetics
Mini
30°
6
The Control Panel
12345678910
95°
60°
40°
30°
60°
30°
Cottons
30°
Rinses
Wool
40°
Delicates
40°
Spin
Drain
Off
40°
30°
Synthetics
1200
900
700
500
Spin
Start/
Pause
Delay
Time
Washing
Door
End cycle
Time
ZWF 1227 W
Night
Cycle
Option
Intensive
Prewash
Quick
Extra rinse
Mini
30°
7
3 “Spin” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine or to
choose the “Rinse Hold” option. The relevant light
will light up.
Maximum speeds for the different models are:
for cottons: 1200 rpm for ZWF 1227 W and
1400 rpm for ZWF 1427 W
for synthetics fabrics and Wool: 900 rpm;for
for delicate fabrics and Mini 30°: 700 rpm.
“Rinse Hold” position: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
At the end of the cycle, the light of the “Start/Pause
button goes out, the “End cycle” light illuminates and
the “Door” light stays on (the door is locked) to
indicate that the water must be drained. A flashing zero
appears on the display.
To complete the cycle, there are 2 possibilities for
emptying out water:
Select programme “Drain”: the water is emptied out
without spinning.
IMPORTANT!
By pressing the Intensive and Start Pause buttons
simultaneously for about 3 secondes, the acoustic
signal is deactivated at the end of the cycle, when
selecting the programmes and in case of an incorrect
option selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.
132978490.qxd 22/09/2006 14.06 Pagina 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWF1227W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1227W in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info