24581
9
Zoom out
Zoom in
Previous page
1/22
Next page
67
ENGLISH
You can cancel the delay time at any moment,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by pressing
the START/PAUSE button;
• press the button once, the light relevant to the
selected delay goes off;
• press the START/PAUSE button again.
Important!
The selected delay can be changed only after
selecting the washing programme again.
The door will be locked throughout the delay time .
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After closing the door,
press the START/PAUSE button again.
The delay start cannot be selected with SPIN
and DRAIN programmes.
6 Programme progress display
When you choose the delayed start, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
WASHING : when this light comes on this
means that the machine is performing the
washing programme.
END : end of programme
The pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something
not working”.
4 H
2 H
8 H
7 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD (anti-crease) option.
The speeds on the dial refer to cotton programmes.
Position 1000, 1200, 1400 or 1600 corresponds to
900 r.p.m. for synthetics, wool and handwash; 700
r.p.m. for delicates and .
Position 500 or 700 corresponds to 450 r.p.m. for
delicates and ; 500 r.p.m. for coton, synthetics,
wool and handwash.
NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programmes.
RINSE HOLD (anti-crease) : by selecting this
option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. When
the programme has finished the phase light is
on to indicate that the water must be emptied
out.
To do this:
turn the programme selector dial to “O
select the drain or spin programme.
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position or the machine will perform the
spin speed at 400 rpm.
depress START/PAUSE button.
8 Programme selector dial
The selector is divided into 6 sections:
Cotton
Synthetics
Delicates and handwash
Wool
Miniprogramme
Special programmes (rinses , drain and spin
)
132984951GB.qxd 23/06/2006 16.26 Pagina 67
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWF1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1200 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZWF1200

Zanussi ZWF1200 User Manual - English - 21 pages

Zanussi ZWF1200 User Manual - German - 21 pages

Zanussi ZWF1200 User Manual - Dutch - 26 pages

Zanussi ZWF1200 User Manual - French - 21 pages

Zanussi ZWF1200 User Manual - Italian - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info