24581
19
Zoom out
Zoom in
Previous page
1/21
Next page
77
Problems which you can resolve yourself, before calling the After Sales Service.
During machine operation it is possible that the light starts to flash:
4 flashes= the door has not been closed
2 flashes= the machine does not empty
1 flash= the machine does not fill.
On model ZWF 1400 an acoustic signal will be heard.
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
Problem Possible cause
The machine does not start up:
The door is not firmly closed.
The machine is not plugged in or there is no power
at the socket.
The main fuse has blown.
The
(delay start)
option has been selected.
The programme selector dial is not positioned correctly
and the START/PAUSE button has not been
depressed.
The machine does not fill:
The water tap is closed.
The inlet hose is squashed or kinked.
The filter in the inlet hose is blocked.
The door is not properly closed.
The machine fills then empties
immediately:
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
The machine does not empty
and/or does not spin:
The drain hose is squashed or kinked.
A programme with option or has been
selected.
The drain pump is clogged.
There is water on the floor:
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
The drain hose is damaged.
The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
Unsatisfactory washing results:
Too little or too much detergent has been used.
An unsuitable detergent has been used.
Stubborn stains have not been treated prior to
washing.
The correct temperature was not selected.
Excessive laundry load.
The machine vibrates or is noisy:
The transit bolts and packing have not been removed.
The support feet have not been adjusted.
The laundry is not evenly distributed in the drum.
Maybe there is very little laundry in the drum.
Something not working?
132984950GB.qxd 13/09/2005 15:43 Pagina 77 (Nero/Process Black pellicola)
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWF1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWF1200 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZWF1200

Zanussi ZWF1200 User Manual - English - 22 pages

Zanussi ZWF1200 User Manual - German - 21 pages

Zanussi ZWF1200 User Manual - Dutch - 26 pages

Zanussi ZWF1200 User Manual - French - 21 pages

Zanussi ZWF1200 User Manual - Italian - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info