649510
9
Zoom out
Zoom in
Previous page
1/24
Next page
Important! If you turn the programme selector
dial to another programme when the machine is
working, the lights in the programme progress
display will start to flash to indicate a wrong
selection. The machine will not perform the new
selected programme.
Select the spin speed, Rinse Hold or No
spin option (
2
)
Select the spin speed, Rinse Hold option or No
Spin option by turning the spin speed selector.
For the maximum spin speed allowed by each
programme, refer to the chapter Washing pro-
grammes.
The position 1300 is equivalent to 900 rpm/
min for the synthetic and wool programmes
and 700 rpm/min for the delicate wash pro-
gramme.
The position 500 is equivalent to 500 rpm/
min for the synthetic and wool programmes
and 450 rpm/min for the delicate wash pro-
gramme.
Select the desired option by means of
buttons
7
,
8
and
9
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before pressing the button
6
. The relevant
light will illuminate.
Time
Quick
Daily
8h
Prewash
Extra
Rinse
Delay
Start
Start
Pause
If an incorrect option is selected, the corre-
sponding indicator lamp flashes for about 2
seconds. For the compatibility of the options
with the washing programmes, refer to the
chapter «Washing programmes».
Select the Delay Start by pressing button
5
Before you start the programme, if you wish to
delay the start, press the button
5
repeatedly,
to select the desired delay. The corresponding
pilot light will light up.
8h
4h
2h
Washing
End
Door
Delay
Start
You must select this option after you have set
the programme and before you press button
Start Pause.
You can cancel or modify the delay time at any
moment, before you press button Start Pause.
Cancelling the delayed start after having press-
ed button Start Pause :
1. Set the washing machine to PAUSE by
pressing button Start Pause.
2.
Press the button
5
repeatedly until the
light relevant to the selected delay goes
off.
3. Press button Start Pause again to start
the programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time (door locked light lit).
The Delay Start can not be selected with
DRAIN or SPIN programme.
Start the programme by pressing button
6
To start the selected programme, press this
button; the corresponding pilot light stops
flashing and remains lit.
On programme progress display the pilot lights
Washing and Door illuminate to indicate that
the appliance starts operating and the door is
locked.
Altering an option or a running
programme
It is possible to change any option before the
programme carries it out.
9
www.zanussi.com
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZWC1301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZWC1301 in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info