447686
24
Zoom out
Zoom in
Previous page
1/60
Next page
Operating
21 3
4
5
EXTRA DELICATE
this function decreases the movement of the laun-
dry during the cycle. The laundry after the cycle is
more soft and loose. For synthetic programmes on-
ly.
INTENSIVE
If the laundry is still damp after a standard drying
programme, you can increase the drying result by
using the Intensive function.
LONG ANTI-CREASE
prolongs the anti-crease phase to 90 mins in total.
The laundry remains relaxed and free of creases.
BUZZER
audible confirmation of:
•cycle end
anti-crease phase start and end
cycle interruption
•error
TIME
after setting the Time programme. You can select a
programme duration from 10 mins to 2 hrs in 10-
minute steps.
DELAY START
allows to delay the start of a drying programme
from minimum of 30 min. to maximum of 20 hours.
Press the Delay Start button repeatedly until the
desired delay start is shown on the display
Setting child lock
The child lock can be set to prevent a pro-
gramme being accidentally started or a pro-
gramme in operation being accidentally
changed. The child lock function locks all but-
tons and the programme selector. The child
lock can be activated or deactivated by holding
down the EXTRA DELICATE and INTENSIVE
buttons simultaneously for 5 seconds.
The icon
appears in the display to indicate
that the child safety device is activated.
Any changes of drying parameters require
child lock deactivation.
The child lock cannot be deactivated in the last
phase of the drying cycle.
Changing programme
To change a programme which is running, first
cancel it by turning the programme selector dial
to
. Select the new programme and press
the START/PAUSE button.
The programme can no longer be changed
directly once the programme has started. If
nevertheless there is an attempt to change the
programme on the programme knob, the pro-
gramme progress display and the maintenance
indicators flash. If an option button (excluding
the BUZZER button) is pressed,
appears
on the display. The drying programme is not
however affected by this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the display
shows the
anti-crease icon and flashing as
well as warning lamps: FILTER and FULL
TANK . If the BUZZER button has been press-
ed, an acoustic signal sounds intermittently for
about one minute.
The drying cycles are automatically fol-
lowed by an anti-crease phase which lasts
around 30 minutes. The drum rotates at inter-
vals during this phase. This keeps the laundry
loose and free of creases. The laundry can be
removed at any time during the anti-crease
phase. (The laundry should be taken out to-
wards the end of the anti-crease phase at the
latest to prevent creases from forming.)
1. Open door.
2. Before removing the laundry, remove fluff
from the micro-fine filter. It is best to use a
24
www.zanussi.com
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZTH 485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZTH 485 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZTH 485

Zanussi ZTH 485 User Manual - German - 16 pages

Zanussi ZTH 485 User Manual - German - 16 pages

Zanussi ZTH 485 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info