71901
24
Zoom out
Zoom in
Previous page
1/60
Next page
audible confirmation of:
cycle end
anti-crease phase start and end
cycle interruption
error
Tijd (Time)
after setting the Tijd (Time) programme. You can select
a programme duration from 20 mins to 2 hrs in 10-mi-
nute steps.
Startuitstel (Delay Start)
allows to delay the start of a drying programme from
minimum of 30 min. to maximum of 20 hours. Press
the Startuitstel (Delay Start) button repeatedly until the
desired delay start is shown on the display
Setting child lock
The child lock can be set to prevent a programme being
accidentally started or a programme in operation being
accidentally changed. The child lock function locks all
buttons and the programme selector. The child lock can
be activated or deactivated by holding down the Lage
temp. (Delicate) and Lang anti-kreuk (Long anticrease)
buttons simultaneously for 5 seconds.
Before programme is started: Appliance cannot be used
After programme is started: Programme in operation
cannot be changed
The icon
appears in the display to indicate that the
child safety device is activated.
The child safety device is not deactivated once the pro-
gramme comes to an end.
If you want to set a new programme, you must first deacti-
vate the child safety device.
Starting the programme
Press the Start/Pauze (Start/Pause) button. The pro-
gramme starts.
The programme progress is shown by elapsing dry time
on the LCD.
Changing programme
To change a programme which is running, first cancel it
by turning the programme selector dial to
. Select the
new programme and press the Start/Pauze (Start/Pause)
button.
The programme can no longer be changed directly
once the programme has started. If nevertheless
there is an attempt to change the programme on the pro-
gramme knob, the programme progress display and the
maintenance indicators flash. If an option button (exclud-
ing the Zoemer (Buzzer) button) is pressed,
ap-
pears on the display. The drying programme is not how-
ever affected by this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, the display shows the
anti-crease icon and flashing as well as warning
lamps: Filter and Waterreservoir (Water Reservoir) . If the
Zoemer (Buzzer) button has been pressed, an acoustic
signal sounds intermittently for about one minute.
The drying cycles are automatically followed by an
anti-crease phase which lasts around 30 minutes.
The drum rotates at intervals during this phase. This
keeps the laundry loose and free of creases. The laundry
can be removed at any time during the anti-crease phase.
(The laundry should be taken out towards the end of the
anti-crease phase at the latest to prevent creases from
forming.)
1. Open door.
2. Before removing the laundry, remove fluff from the
micro-fine filter. It is best to use a damphand for this
purpose. (See “Cleaning and maintenance” chapter.)
3. Remove laundry.
4.
Turn the programme selector to
off.
5. Close the door.
After each use
Clean the filters.
Empty the water reservoir.
Cleaning and maintenance
Cleaning fluff filters
The filters collect all the fluff which accumulates during
drying. To ensure that the dryer works perfectly, the fluff
filters (fine filters and fluff filters) must be cleaned after
each drying cycle.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZTE 285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZTE 285 in the language / languages: English, German, French as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZTE 285

Zanussi ZTE 285 User Manual - Dutch - 38 pages

Zanussi ZTE 285 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info