71983
23
Zoom out
Zoom in
Previous page
1/32
Next page
Cleaning the door
Clean periodically the interior part of the door to remove
any fluff. Accurate cleaning ensures correct drying.
Cleaning the drum
Caution! Do not use abrasives or steel wool to clean
the drum.
Lime in the water or cleaning agents may form a
barely visible lining on the inside of the drum. The
degree to which the laundry has been dried is then no
longer detected reliably. The laundry is damper than ex-
pected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based
cleaner) to wipe down the inside of the drum and drum
ribs.
Clean operating screen and housing
Caution! Do not use furniture cleaners or
aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and
housing.
What to do if ...
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or fuse
is not working correctly.
Plug in at mains socket. Check fuse
in fuse box (domestic installation).
Loading door is open. Close loading door.
Have you pressed the START PAUSE
button?
Press the START PAUSE button
again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme the next
time you dry (see “Programme chart”
chapter).
Fluff filter clogged. Clean fluff filter.
Overloading of laundry.
Observe recommended loading vol-
umes.
Ventilation slots covered up. Uncover ventilation slots.
Residue on inside surface of drum or
drum ribs.
Clean inside surface of drum and
drum ribs.
Conductance of water at installation
site differs from standard setting of
machine.
1)
Re-programme standard setting for
degree of drying (see ‘Machine set-
tings’ chapter)
1)
.
Loading door does not close.
Filter not in place
2)
. Install filter into place
2)
.
Drying cycle ends shortly after pro-
gramme starts.
Not enough washing loaded or wash-
ing loaded is too dry for selected
programme.
Select time programme or higher
drying level (e.g. EXTRA DRY instead
of CUPBOARD DRY ).
Drying cycle lasts an unusually long
time. Note: After around 5 hours the
drying cycle ends automatically.
Filter clogged. Clean filter.
Load volume too big. Reduce load volume.
Laundry insufficiently spun. Laundry must be adequately spun.
1) Only dryers with conductance programming
2) Only dryers with removable filter
23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZTB 271 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZTB 271 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZTB 271

Zanussi ZTB 271 User Manual - Dutch, French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info