Manual Zanussi ZRB 936XL (page 23 of 52) (English, German, Dutch, French)

447674

Zoom out

Zoom in

1/52

Electrical connection

Before plugging in, ensure that the voltage and frequency

shown on the rating plate correspond to your domestic

power supply.

The appliance must be earthed. The power supply cable

plug is provided with a contact for this purpose. If the do-

mestic power supply socket is not earthed, connect the

appliance to a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above

safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Door reversibility

Warning! Before carrying out any operations,

remove the plug from the power socket.

Important! To carry out the following operations, we

suggest that this be made with another person that will

keep a firm hold on the doors of the appliance during the

operations.

• Open the doors. Un-

screw the middle hinge

(m2). Remove the plas-

tic spacer (m1).

• Remove the spacer (m6)

and move to the other

side of the hinge pivot

(m5).

• Remove the doors.

• Remove the left-hand

cover pin of the middle

hinge (m3,m4) and

move to the other side.

• Fit the pin of the middle

hinge (m5) into the left-

hand hole of the lower

door.

• Unscrew the lower hinge

(b1)

• Remove the left-hand

cover pins (b4) and

move to the other side.

• Re-screw the lower

hinge (b1) on the oppo-

site side.

• Unscrew the lower hinge

pivot (b2) and the

spacer (b3) and place

them on the opposite

side.

• Remove the plugs (1) on

the upper side of both

doors and move them to

the other side.

• Re-insert the lower door

on the lower hinge pivot

(b2).

• Insert the middle hinge

(m2) into the left drill of

the lower door.

• Unscrew the upper

hinge pivot and place it

on the opposite side.

• Fit the upper door on the

upper door pivot.

• Re-insert the upper door

on the middle hinge piv-

ot (m5) slightly tilting

both doors.

• Re-screw the middle

hinge (m2). Do not for-

get the plastic spacer

(m1).

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to the side edge of

the appliance.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gas-

ket may not fit perfectly to the cabinet. In that case, wait

for the natural fitting of the gasket.

In case you do not want to carry out the above mentioned

operations, contact the nearest After Sales Service Force.

The After Sales Service specialist will carry out the rever-

sibility of the doors at your cost.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZRB 936XL in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZRB 936XL Manual

Product: