447667
12
Zoom out
Zoom in
Previous page
1/30
Next page
12
GB
Change the position of the
lower door mask cover
(Picture 8). Remove
opening mask from the work
plate and fix it to the other
side (Picture 9).
Install work plate back to the
refrigerator (Picture 10).
Stick label, enclosed in the
bag of spare parts, on front
of the work plate. Put the
thermostate button to front of
the work plate.(Picture 11).
Fix the double door holder
onto the left side using the
screws (2 pieces). Be careful
that the door edge is parallel
with the edge of the mantle
(Picture 12).
Fit the upper door to the
double door hinge. Fix the
upper door shaft onto the
left side using the screws
you removed previously. Be
careful that the door edge
of the refrigerator is parallel
with the edge of the top cap
(Picture 13).
Put over the handle on the opposite side and
cover up the vacant holes with the plastic nails
from the bag of spare parts. (Picture 14).
Put the appliance to its place, set it’s level with
leveling front legs, and connect it to the electricity
supply.
In case you don’t want to perform the procedures
above, call the nearest brand-mark service.
Technicians will accomplish the refilling expertly
for charge.
Electrical connection
This refrigerator is designed to operate on
230 VAC (~) 50 Hz supply.
The plug must be put into a socket with
protective contact. If there is no such, it is
recommended to get an electrician to fit an
earthed socket in compliance with standards
near the refrigerator.
This appliance complies with the following
E.E.C. Directives:
- 73/23 EEC of 19.02.73 (Low Voltage Directive) and
subsequent modifications,
- 89/336 EEC of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZRB 324WO1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZRB 324WO1 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info