Manual Zanussi zob 641 x (page 8 of 12) (English)

330167

Zoom out

Zoom in

1/12

Replacing the Oven Light

Ensure the electricity supply is switched off

before carrying out this operation.

The oven bulb has to comply to these features:

a) resistant to temperatures of 300 °C;

b) electric rate: 230 V - 50 Hz;

c) electric power rate: 25 W;

d) connection type: E 14.

To replace the bulb, proceed as follows (Fig. 6):

a) push in and turn the glass lid anticlockwise;

b) remove tha faulty bulb;

c) replace it with a new one;

d) refit the glass lid;

e) switch on the electricity supply.

FO 0287

Fig. 6

Cleaning and maintenance

General Cleaning

Before carrying out any cleaning or

manteinance work, always disconnect the

appliance from the electrical supply, and

allow it to cool down.

 When using spray cleaning products, be careful not

to spread them on the heating elements or on the

thermostat sensor.

 Never use harsh abrasives, steel wool or cleaners

with bleach, as they could damage the enamel and

the oven door glass.

The Oven Cavity

The enamelled oven cavity is best cleaned whilst the oven

is still warm. It is advisable to wipe the oven over with a soft

cloth soaked in warm soapy water after each use.

However, from time to time, it will be necessary to do a

more complete cleaning, using a proper oven cleaner.

In case of particularly tough stains, you can use stainless

steel cleaning products or some warm vinegar.

If cooking fruits, some over-heated natual acids

can squeeze and settle on the oven enamel,

causing stains quite difficult to remove. This could

affect the enamel brightness, but it will have no

consequence on the oven performances. To avoid

these stains to be burnt out during the next

cooking, carefully clean the oven cavity after all

fruits cookings.

The Oven Door and its gasket

Before cleaning the oven door, we recommend you to

remove it from the oven. Proceed as follows:

a) open the oven door completely;

b) find the hinges linking the door to the oven (fig. 7);

c) unlock and turn the small levers located on the two

hinges (fig. 7);

d) handle the door by its left- and right-hand sides, then

slowly turn it towards the oven until it is half-closed;

e) gently pull the oven door off its site (fig. 7);

f) place it on a steady plan.

Clean the oven door glass with warm water and a softh

cloth only. Once the cleaning is carried out, refit the

oven door, following the procedure in reverse.

The correct operation of the oven is ensured by a gasket

placed round the edge of the oven cavity.

 Periodically check the condition of this gasket. If

necessary, clean it without using abrasive cleaning

products.



If the gasket shows to be damaged, call you local

Service Centre. Do not use the oven until it has been

repaired.

Fig. 7

FO 0288

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zob 641 x in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi zob 641 x Manual

Product: