447444
17
Zoom out
Zoom in
Previous page
1/56
Next page
Do not clean the glass door with abrasive cleaning
agents or metal scraper. Heat resistant surface of the
inner glass can break and shatter.
When the door glass panels are damaged they be-
come weak and can break. You must replace them.
Contact the service centre.
Be careful when you remove the door from the appli-
ance. The door is heavy!
Do not clean catalytic enamel (if applicable).
Risk of fire
Open the door carefully. The use of ingredients with
alcohol can cause a mixture of alcohol and air. There
is the risk of fire.
Do not let sparks or open flames come near the ap-
pliance when you open the door.
Do not put flammable products or items that are wet
with flammable products, and/or fusible objects
(made of plastic or aluminium) in, near or on the ap-
pliance.
Oven lamp
Bulb lamps used in this appliance are special lamps
selected for household appliances use only. They
cannot be used for the full or partial illumination of a
household room.
If it becomes necessary to replace the lamp use one
of the same power and specifically designed for
household appliances only.
Disconnect the appliance from the power supply be-
fore the replacement of the oven lamp. There is the
risk of electrical shock.
Service centre
Only an approved engineer can repair or work on the
appliance. Contact an approved service centre.
Use only original spare parts.
Disposal of the appliance
To prevent the risk of physical injury or damage
Disconnect the appliance from the power supply.
Cut off the mains cable and discard it.
Discard the door catch. This prevents children or
small animals from being closed inside of the ap-
pliance. There is the risk of suffocation.
Before first use
Warning! Refer to "Safety information" chapter.
Initial Cleaning
Remove all parts from the appliance.
Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents!
This can damage the surface. Refer to chapter
"Care and Cleaning".
Pre-heating
1.
Set function
and maximum temperature.
2. Let the appliance operate without the food for ap-
proximately 1 hour.
3.
Set function
and maximum temperature.
4. Let the appliance operate without the food for ap-
proximately 10 minutes.
5.
Set function
and maximum temperature.
6. Let the appliance operate without the food for ap-
proximately 10 minutes.
This is to burn off the residue in the appliance. The ac-
cessories can become more hot than usually. When you
pre-heat the appliance for the first time, the appliance
can make an odour and smoke. This is the usual effect.
Make sure the airflow is sufficient.
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZOB 365 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZOB 365 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info