551974
27
Zoom out
Zoom in
Previous page
1/32
Next page
2
3
1
1. Carefully pull the supports up and out of
the front catch.
2. Lightly move the supports on the front
catch inwards.
3. Pull the supports out of the rear catch.
Installing the shelf support
To install the shelf support follow the procedure
in the opposite order.
Lamp
Warning! There is a risk of electrical
shock.
The lamp and the lamp glass cover can be hot.
Before you change the lamp:
Deactivate the appliance.
Remove the fuses from the fuse box or deac-
tivate the circuit breaker.
Caution! Put a cloth on the bottom of the
interior of the appliance. It prevents
damage to the lamp glass cover and the cavity.
Always use the same lamp type.
Replacing the lamp at the cavity ceiling:
1. Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
heat-resistant lamp.
4. Install the glass cover.
What to do if…
Warning! Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not heat up. The appliance is deactivated. Activate the appliance.
The appliance does not heat up. The clock is not set. Set the clock. Refer to "Setting the
clock".
The appliance does not heat up. The necessary settings are not
set.
Make sure that the settings are
correct.
The appliance does not heat up. The automatic cut-out is activa-
ted.
Refer to “Automatic switch-off”.
The appliance does not heat up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
The display shows an error code
that is not on this list.
There is an electrical fault. Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and acti-
vate it again.
If the display shows the error
code again, contact the Cus-
tomer Care Department.
27
www.zanussi.com
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZNF44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZNF44 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZNF44

Zanussi ZNF44 User Manual - German - 32 pages

Zanussi ZNF44 User Manual - Dutch - 36 pages

Zanussi ZNF44 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info