73995
7
Zoom out
Zoom in
Previous page
1/19
Next page
7
Replacing the bulb in the
refrigerator compartment
Remove the plug from the power socket. The bulb is
easy to change after having removed the fixing
screw and the diffuser.
Use a bulb having the same characteristics
(maximum power 15 W, Edison E 14 base fitting ).
Refit the diffuser and fully tighten the screw.
Defrosting
Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use. The defrost
water drains out through a trough into a special
container at the back of the appliance, over the
motor compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.
The freezer compartment, however, will become
progressively covered with frost.This should be
removed with the special plastic scraper provided,
whenever the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
D037
MAINTENANCE
Unplug the appliance before carrying out
any maintenance operation.
Warning
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Periodic cleaning
Clean the inside with warm water and bicarbonate of
soda.
Rinse and dry thoroughly.
Clean the condenser (black grill) and the
compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will
improve the performance of the appliance and save
electricity consumption.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent
unpleasant smells.
D051
38
Indien de kast lateraal bevestigd wordt aan het
meubel, schroef de schroeven van het profiel(E) los
en plaats dat volgens Figuur.
D735
E
E
Controleer na de richting van de deuren
gewijzigd te hebben, dat alle schroeven goed
vastgedraaid zitten en dat het deurrubber goed
op de sponning sluit. In een koud vertrek (in de
winter) kan het gebeuren dat dat niet het geval
is. Na enkele dagen zal het rubber zich echter
aangepast hebben. Wilt u dat bespoedi-gen, dan
kunt u het rubber warm maken met een föhn.
Afdekking (Hd) op geleider (Hb) vastklikken.
De deur van het apparaat en die van de kast met
een hoek van ongeveer 90° openen. IJzer (Hb) in
geleider (Ha) aanbrengen. De deuren samen
vasthouden en de gaten aangeven zoals in de
tekening.
PR167
Ha
Hb
8mm
Verwijder de haken en zet met de spijker (K) een
teken op 8 mm van de buitenste rand van de deur.
Ha
8mm
K
Plaats het ijzer opnieuw op de geleider en bevestig
het met de bijgeleverde schroeven.
Voor het rechtstellen van de kastdeur kunt u gebruik
maken van de langwerpige gaten.
Tenslotte dient u te controleren of de deur van het
apparaat goed sluit.
PR168
Hb
PR167/1
Hd
Hb
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZI 9311 DIS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZI 9311 DIS in the language / languages: English, Dutch, Italian as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info