Manual Zanussi zhc 6141 x (page 10 of 32) (English, German, Dutch, French, Portuguese, Spanish)

133094

Zoom out

Zoom in

1/32

INSTALLATION

The cooker hood must be installed centrally over a cooking appliance. The minimum distance

between the cooking surface and the metal grease filters on the underside of the hood must be

at least 650mm.

To install the hood proceed as follows:

1) Drill six 8mm diameter holes at X1-X2-J and insert the plastic rawl plugs supplied as illus-

trated in fig. 2 ensuring the brackets are fitted as shown in the blow up.

2) Secure the two brackets C to the wall inserting two of the screws supplied through the two

holes on line X1-X2 as illustrated in fig. 2.

3) Slide the canopy down the wall to locate the key hole over the washer then secure the can-

opy to the wall by inserting two of the screws supplied through the two outer holes in the

rim of the canopy J1 and J2 as illustrated in fig. 3.

4) EXTRACTION OR RECIRCULATION INSTALLATION:

• EXTRACTION (DUCTED)

When installing the ducted version, connect the hood to the chimney using either a flexible or

rigid pipe ø 150 or 120 mm, the choice of which is left to the installer.

• To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body

outlet.

• Fix the pipe in position using sufficient pipe clamps (not supplied).

• Remove any activated charcoal filters.

• RECIRCULATION (FILTERED)

• When the hood is fitted in the recirculation mode the Air Outlet Connection H should be

fitted as illustrated in fig. 6.

• Fit the (optional) charcoal filters by repeating the following operation on each side of the

motor housing. Place the two key hole slots in the filter L and turn the filter clockwise to

lock the filter in position as illustrated in fig. 7.

WARNING: It is a possible fire hazard if the metal grease filters are not cleaned and the

charcoal filters replaced regularly.

Fitting The Chimney

5) FITTING THE CHIMNEY UPPER

To fit the upper chimney A, place the top edge of the chimney over the bracket C as illus-

trated in fig. 8 and secure the chimney using two of the 2.9mm self tapping screws pro-

vided.

The distance H in the height between the fixing holes X1 and X2 is determined by the

height of the upper chimney A.

6) FITTING THE CHIMNEY LOWER

To fit the lower chimney B, apply slight force to the two rear edges to increase the width

of the apperture, then sleeve the chimney B over the chimney A as illustrated in fig. 9.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zhc 6141 x in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi zhc 6141 x Manual

Product: