447499
61
Zoom out
Zoom in
Previous page
1/72
Next page
61
Installing the flues
1
=
=
Extend the vertical centre line so that it
reaches the ceiling (1).
2
2
÷ 3-4 mm
Fit the 2 flue fixing brackets (2), 3/4 mm away
from the ceiling at the top and in contact with
the hood at the bottom. Use 2 screws and 2
rawl plugs per bracket.
Use the brackets as drilling templates.
The "v" indicator on each bracket should be
aligned with the centre line marked on the
wall previously.
3
5
5
4
Connect the electricity supply (3) and exhaust
tube (4) if necessary.
Cut the seals to size (4 pieces) and apply
them to the sides of the lower flue bracket (5).
Fit the flues onto the lower bracket; insert the
flue tabs into the corresponding slots on top of
the hood (6).
Fix the upper part of the flue in place using 2
screws (7).
6
7
7
Caution! Before beginning this procedure, we recommend you cover the hood with a protective
sheet; this will prevent it from being damaged by the dust created as you drill holes in the wall.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZHC 6121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZHC 6121 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info