101193
16
Zoom out
Zoom in
Previous page
1/64
Next page
GB 16
INSTALLING THE COOKER HOOD
Drilling the Ceiling/Support
Shelf
Use a plumb line to mark the centre of the hob on
the ceiling/support shelf.
Place the drilling template 21 provided on the ceiling/
support shelf, making sure that the template is in the
correct position by lining up the axes of the template
with those of the hob.
• Mark the centres of the holes in the template.
• Drill the holes at the points marked:
For concrete ceilings, drill for plugs appropriate to
the screw size.
For hollow brick ceilings with wall thickness of 20
mm: drill ø 10 mm (immediately insert the Dowels
not provided).
For wooden beam ceilings, drill according to the
wood screws used.
• For wooden shelf, drill ø 7 mm.
• For the power supply cable feed, drill ø 10 mm.
For the air outlet (Ducted Version), drill according
to the diameter of the external air exhaust duct
connection.
Insert two screws of the following type, crossing them
and leaving 4-5 mm from the ceiling:
For concrete ceilings, use the appropriate plugs
for the screw size (not provided).
For Cavity ceiling with inner space, with wall thi-
ckness of approx. 20 mm, Screws not provided.
For wooden beam ceilings, use 4 wood screws
(not provided).
For wooden shelf, use 4 screws with washers and
nuts (not provided).
Fixing the Frame
In case the hood is used in recycling version it is
necessary to prepare the frame with all the necessary
connection pieces. In order to make the installation
easier it is necessary to lengthen the frame:
Unscrew the two screws 2.1 xing the upper chimney
to the frame and pull the chimney out.
Unscrew the four safety screws placed at the top in
the frame separation area. (A).
Unscrew the eight metric screws connecting the two
columns, placed on both sides of the frame (B).
A
B
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZHC 590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZHC 590 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info